2020 Ram 1500 Big Horn Pickup 4d 5 1/2 Ft on 2040-cars

Auto blog

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

Ram brings two new special edition trucks to Chicago

The Chicago Auto Show has historically been a truck-heavy expo, and this year FCA is rolling out two new versions of its stalwart pickup: the limited edition Ram 1500 Copper Sport and the Ram Heavy Duty Night edition. While there are no changes under the skin, the pair of appearance packages add a host of unique touches inside and out to help truck buyers set their rides apart from the crowd. The Ram 1500 Copper Sport starts at $46,950 and will be limited to just 3,000 units. That's a drop in the bucket compared to number Ram pickups that the automaker sells every year, but at least it's a limited edition that's actually limited. All models will be Crew Cab V8s. Aside from the copper-colored paint on the body, grille, and bumpers, the Copper Sport adds contrasting black-decaled Sport performance hood, black Ram's head grille badge, black tailgate badge and black body-side badges. The Copper Sport also comes with unique wheels in either 20- or 22-inch diameters (depending on whether you get a 4x2 or 4x4). View 10 Photos Inside, the truck gets copper-colored accents on the seat, headrests, and minor trim pieces. The headliner and A-pillars are all black to match the copper and black mesh seats. The Copper Sport also comes with a nine-speaker Alpine audio system that includes a subwoofer. The Ram Heavy Duty Night edition package is available on both 2500 and 3500 models, expanding on from the half-ton Ram 1500 Night edition. Like the Copper Sport, the Night edition is a special appearance package that doesn't change anything underneath. Where the former adds copper touches inside and out, the Night edition is essentially a factory blackout kit. On the exterior, the chrome on the wheels, grille, headlight bezels, and badges are replaced with either a gloss or matte-black finish. Inside, the Night edition comes with black vinyl and cloth seats. View 7 Photos Like the Copper edition, the only body style available is the Crew Cab. The package also isn't available on dualie 3500s, though customers can choose from two Hemi V8s or a Cummins diesel inline-six. The Night edition starts at $46,840 for a two-wheel drive Ram 2500. Look for the pair to hit showrooms in the next few months. Related Video: Featured Gallery Ram Copper Sport and Heavy Duty Night Models View 12 Photos News Source: FCA Design/Style Chicago Auto Show RAM Truck

Stellantis reports surprising 2020 results, is 'off to a flying start'

MILAN — Low global car inventories and cost cuts should boost Stellantis's profit margins this year, though a shortage of semiconductors and investments in electric vehicles could weigh on results, the newly-formed automaker said on Wednesday. The forecast came as Stellantis, created by the January merger of Peugeot-maker PSA and Fiat Chrysler (FCA), reported better-than-expected results for 2020 that sent its shares up around 3% in morning trading. "Stellantis gets off to a flying start and is fully focused on achieving the full promised synergies (from the merger)," Chief Executive Carlos Tavares said in a statement. Stellantis is the world's fourth largest carmaker, with 14 brands including Fiat, Peugeot, Opel, Jeep, Ram and Maserati. It said 2021 results should be helped by three new high-margin Jeep vehicles in North America and a strong pricing environment there. The U.S. market has driven profits for years at FCA and starts off as the strongest part of Stellantis. The group's guidance assumes no more significant lockdowns caused by the global COVID-19 pandemic, which shuttered auto plants around the world last spring. Stellantis should also get a lift as its starts to implement a plan aimed at delivering over 5 billion euros a year in savings, without closing any plants. Tavares has also pledged not to cut jobs. But a pandemic-related global shortage of semiconductors, used for everything from maximizing engine fuel economy to driver-assistance features, could hurt business. Auto industry executives have said the shortage should ease by the second half of 2021. Stellantis said its "electrification offensive" could also weigh on results this year. Automakers are racing to develop electric vehicles to meet tighter CO2 emissions targets in Europe and this week Volvo joined a growing number of carmakers aiming for a fully-electric line-up by 2030. Stellantis plans to have fully-electric or hybrid versions of all of its vehicles available in Europe by 2025, broadly in line with plans at top rivals such as Volkswagen and Renault-Nissan, although Stellantis has further to go to meet that goal. The carmaker is targeting an adjusted operating profit margin of 5.5%-7.5% this year. That compares with a 5.3% aggregated margin last year: 4.3% at FCA and 7.1% at PSA excluding a controlling stake in parts maker Faurecia, which is set to be spun-off from Stellantis shortly.