2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

2014 Ram Promaster recalled over stuck pedal fears

Ram's new, Fiat-derived cargo van, the ProMaster, is set to be recalled over concerns that the accelerator pedals could stick. The issue affects 9,655 ProMasters, with 7,935 vans in the US, 1,437 vehicles in Canada and 283 in Mexico.
There have been no reported injuries or crashes from the issue - according to The Detroit News, there haven't even been any customer complaints. The issue was reportedly discovered while Chrysler was testing the vehicle at its proving ground, which is what prompted the internal investigation. Still, it's unlikely that ProMaster vans will suffer from unintended acceleration issues, as each van is equipped with a brake-throttle override.
As of this writing, there's been no bulletin or activity from the National Highway Traffic Safety Administration.

Chrysler appoints new heads of Alfa Romeo and Ram

Chrysler has announced to two key appointments to its senior leadership, both of them taking immediate effect. First up is Reid Bigland, who has been named head of the Alfa Romeo brand for North America. Bigland has served until now as head of the Ram Truck brand, a portfolio he now hands over to Robert Hegbloom, who had served until now as its director.
As a result of the appointments, both Bigland and Hegbloom will take up seats on Chrysler's NAFTA Leadership Team, and Bigland will also join the Fiat Chrysler Group Executive Council - the highest decision-making body in the Fiat Chrysler Automobiles empire.
As per Sergio Marchionne's leadership style, Bigland will continue to serve in two major capacities, maintaining his role as president and CEO of Chrysler Canada. Other senior executives who hold multiple key portfolios include Harald Wester (who serves as the group's Chief Technology Officer and also overseas Alfa Romeo, Maserati and Abarth), Olivier Francois (group Chief Marketing Officer and head of the Fiat brand) and Michael Manley (head of the Asia-Pacific region and the Jeep brand).

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.