2014 Ram 1500 Slt on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

FCA CEO Mike Manley will take undefined new role after PSA merger

MILAN — Fiat Chrysler Chief Executive Mike Manley will remain with the new group set to result from a planned merger with French rival PSA-Peugeot, Chairman John Elkann said on Wednesday. In a letter to Fiat Chrysler (FCA) employees on the day the two companies announced a binding agreement for a $50 billion tie-up to create the world's fourth-largest carmaker, Elkann said he was "delighted" that the combined group would be led by current PSA CEO Carlos Tavares. "And Mike Manley, who has led FCA with huge energy, commitment and success over the past year, will be there alongside him," he said. He did not say what position Manley would hold. Elkann — who will chair the new group — said there was still much to be done to complete the merger. "Over the coming months we must work tirelessly and determinedly to fulfill all the approval requirements needed to finalize the commitment we have signed," he said. Related Video:     Hirings/Firings/Layoffs Chrysler Dodge Fiat Jeep RAM Citroen Peugeot FCA PSA merger Mike Manley carlos tavares

Hypermiling a Ram 1500 EcoDiesel to 38.1 mpg

You never quite know what Wayne Gerdes has up his sleeve. The man who coined the term hypermiling is always looking for adventurous ways to prove that anyone – even you... yes, you – can eke out more miles per gallon just by changing the way you drive. Saying that is easy. Proving it by going on outlandish cross-country drives is hard. But for Gerdes and his team of fuel economy fiends over at CleanMPG, hard is half the fun. Our latest adventure appeared, at first glance, to be nearly impossible. Which is why we always answer the phone when Gerdes calls. He likes to take journalists along on his drives, not only to try teach us how to hypermile but also to prove that we can be taught. The first time I 'helped' him and his team was when we got over 30 miles per gallon in a 2011 Ford F-150 XLT with the EcoBoost 3.5-liter V6. The EPA rated that truck with at just 16 mpg in the city and 22 on the highway. So, we'll count that trip as a success. Next up was a cross-country drive last fall in a trio of Audi TDI vehicles to prove that you don't need to drive extra slow to beat the EPA numbers. In fact, we made it from Los Angeles to New York City in just over 46 hours, cramped but not cranky. We had once again proven that how you drive is hugely important to your fuel usage. Our latest adventure appeared, at first glance, to be nearly impossible. The EPA says that the Ram 1500 EcoDiesel we would be driving gets just 22 combined mpg (19 city and 27 highway). Gerdes' idea was to drive it as far north from Houston, TX towards Detroit, MI as we could go on one tank. The day before we left, our itinerary got an extra stop. Instead of taking one of the official Shell Eco-marathon prototype vehicles to Detroit, it was decided to bring the winning diesel-powered prototype from the just-finished event to The Henry Ford Museum, where it had been arranged the car would be displayed. The winning car was built by a small team (just four students) from Sullivan High School in Sullivan, IN, who managed to beat a number of college teams with a score of 1,899.32 mpg. That target would be a bit out of reach for the Ram, but could we get 1,000 miles from the tank? Since the truck has a 26 gallon tank (officially, anyway), that would mean the EPA says we could only go 702 miles, assuming all highway driving. Could we make up 300 miles with careful driving? That spells both challenge and fun.