2013 Ram 1500 Slt 10k Miles 4x4 20"wheels Flex Fuel Remaining Factory Warranty on 2040-cars

Auto blog

EPA suspected Fiat Chrysler of using 'defeat device' in 2015

U.S. regulators told Fiat Chrysler Automobiles in November 2015 that they suspected some of the automaker's vehicles were equipped with secret software allowing them to violate emission control standards, according to emails disclosed on Friday. The U.S. Environmental Protection Agency and California Air Resources Board accused Fiat Chrysler in January of using the software, known as a "defeat device," to illegally allow excess diesel emissions in 104,000 Jeep Grand Cherokees and Dodge Ram 1500 trucks built between 2014 and 2016. Byron Bunker, director of the EPA's Transportation and Air Quality compliance division, said in a January 2016 email to Fiat Chrysler, obtained by Reuters under the Freedom of Information Act, that he was "very concerned about the unacceptably slow pace" of the automaker's efforts to explain high nitrogen oxide emissions from some of its vehicles. Nitrogen oxide is linked to smog formation and respiratory problems. Bunker's email said the EPA had told Fiat Chrysler officials at a November 2015 meeting that at least one auxiliary emissions control device on the car maker's vehicles appeared to violate the agency's regulations. Mike Dahl, head of vehicle safety and regulatory compliance for Fiat Chrysler's U.S. unit, responded in a separate email that the company was working diligently and understood the EPA's concerns. He added that if the EPA identified Fiat Chrysler vehicles as containing defeat devices it would result in "potentially significant regulatory and commercial consequences." The documents redacted the vehicles named, but two officials briefed on the matter said they referred to diesel models. The EPA's November 2015 meeting with Fiat Chrysler came two months after Volkswagen AG, mired in a major tailpipe emissions scandal, admitted to installing secret defeat device software in hundreds of thousands of U.S. diesel cars to make them appear cleaner than they were on the road.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.