2013 Ram 1500 4wd Crew Cab 140.5" Sport on 2040-cars

Auto blog

2019 Ram 1500 Tradesman shows off its simple lights

Each time a spy photographer has caught the 2019 Ram 1500 pickup running around, it's always had the same style of lights and grilles. This time, one of our photographers caught two Rams that have noticeably different versions of those body parts. The first one shown above has the same grille we've already seen. The difference is that the flashy LED-accented headlights are gone. Instead, it uses much simpler, more conventional reflector-style headlights. That doesn't mean Ram hasn't taken the time to give them a little flair, though. The lamps are divided such that the upper element lines up with the upper portion of the grille, and the lower portion with the grille bars and lower opening. The taillights are much simpler, too, also using a reflector setup and very clear lenses. These plain headlights lead us to believe that this is a base-model 1500 Tradesman. The second Ram shown has its lights well-covered, but the grille is exposed, and it's also different from past prototypes. It has a wavy mesh pattern in the grille openings rather than slats. The crossbar design remains, though. This different grille also confirms that Ram will offer appearance variations to distinguish models. We're not sure if this is a higher-level or lower-level trim, though. We would have a better idea if we could see the lights. All our questions should be answered soon, since the new Ram 1500 will be fully revealed next week at the Detroit Auto Show. Then we'll see all the grilles and headlights and their associated trims as they were meant to be. Related Video:

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

Ram 2500 HD video shows off new engine, rear suspension

We've already had a chance to drive the 2014 Ram 3500 HD, but the big news for the 2014 Ram Heavy Duty lineup might be centered around the three-quarter-ton 2500 model. Chrysler has released a new video highlighting the new features of the 2014 Ram 2500 HD, including its new optional engine and new rear suspension components.
The video starts by showing off the Ram's new 410-horsepower 6.4-liter Hemi V8 and then gives us an up-close look at the coil spring, multi-link rear suspension - one of the truck's most important upgrades aimed at delivering a smooth ride. In addition to this coil suspension, the Ram 2500 HD will also be available with a rear air suspension system, which Chrysler says will optimize the truck's hauling abilities with better load leveling and trailer towing.
Scroll down for the walkaround video of the 2500 HD from Chrysler as well as the original press release breaking down all of the truck's new-for-2014 features.