2013 Ram 1500 2wd Crew Cab 140.5" Lone Star on 2040-cars

Auto blog

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

Ram Truck digs in with Laramie Longhorn-inspired Case backhoe

Some combinations seem natural immediately like chocolate and peanut butter, but others take a little more consideration before they begin make sense. That is exactly the situation with the new partnership between Ram and heavy equipment-maker Case to build a one-of-a-kind Ram 3500 with a matching, customized Case 580 Super N Wide Track Backhoe. The unique combo is currently on display at the CONEXPO-CON/AGG 2014 show in Las Vegas, NV, and afterwards will go on tour for the rest of the year at Ram- and Case-sponsored events.
While it is undoubtedly odd to see a modified backhoe, it almost gets cool when you se the interior. Both vehicles the same two-tone gold and black paint scheme, and the backhoe's cab has been refinished to match the truck with shades of brown leather, Laramie badges and chrome trim. If you have to be in a backhoe, this one looks like the one to choose. Plus, this might be the first backhoe ever with chrome wheels.
The truck that the backhoe is attached to a Ram 3500 Laramie Longhorn Crew Cab 4x4 with a 6.7-liter Cummins Turbo Diesel with 850 foot-pounds of torque, plus an improved transfer case and heavy-duty transmission. Like its matching heavy equipment friend, the truck is also supposed to offer a mix of luxury and working ability. Scroll down for the full press release on this very curious combo.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.