on 2040-cars

Auto blog

Analysts wary over FCA lawsuit but say emissions not as bad as VW

MILAN - Any potential fines Fiat Chrysler (FCA) may need to pay to settle a US civil lawsuit over diesel emissions will unlikely top $1 billion, analysts said, adding the case appeared less serious than at larger rival Volkswagen. The US government filed a civil lawsuit on Tuesday accusing FCA of illegally using software to bypass emission controls in 104,000 vehicles sold since 2014, which it said led to higher than allowable levels of nitrogen oxide (NOx) that are blamed for respiratory illnesses. FCA's shares dropped 16 percent in January when the U.S. Environmental Protection Agency (EPA) first raised the accusations, adding the carmaker could face a maximum fine of about $4.6 billion. The stock has been under pressure since. Volkswagen agreed to spend up to $25 billion in the United States to address claims from owners, environmental regulators, U.S. states and dealers. FCA, which sits on net debt of 5.1 billion euros ($5.70 billion), lacks VW's cash pile but analysts said its case looked much less severe. While VW admitted to intentionally cheating, Fiat Chrysler denies any wrongdoing. Authorities will have to prove that FCA's software constitutes a so-called "defeat device" and that it was fitted in the vehicles purposefully to bypass emission controls. Even if found guilty, the number of FCA vehicles targeted by the lawsuit is less than a fifth of those in the VW case. Applying calculations used in the German settlement, analysts estimate potential civil and criminal charges for Fiat Chrysler of around $800 million at most. Barclays has already cut its target price on the stock to take such a figure into account. Analysts also noted that FCA's vehicles are equipped with selective catalytic reduction (SCR) systems for cutting NOx emissions, so it is likely that any problem could be fixed through a software update. "Should this be the case, we estimate a total cost per vehicle of not more than around $100, i.e. around $10 million in aggregate," Evercore ISI analyst George Galliers said in a note. The estimates exclude any additional investments FCA may be asked to make in zero emissions vehicles infrastructure and awareness as was the case with VW. FCA said last week it would update the software in the vehicles in question, hoping it would alleviate the regulators' concern, but analysts said it may have been too little too late. The carmaker is also facing accusations over its diesel emissions in Europe.

FCA recalls over 200k Jeep Cherokees for windshield wiper static

Fiat Chrysler Automobiles is issuing a recall for over 200,000 versions of the 2014 Jeep Cherokee due to a problem with static buildup disabling the windshield wipers. FCA has identified 158,671 units in the United States. Another 18,366 vehicles are estimated to be affected in Canada, a further 3,582 in Mexico, and 26,049 outside of North America. The problem, according to the first statement below, results from static building up if the wipers are operated in dry conditions. The static could mess with the wipers' control module, rendering them disabled. To fix the problem, dealers will be instructed to install a ground strap to the module. In parallel, FCA is also offering incentives to the owners of certain trucks that were subject to recall but for which remedies were not immediately available. To encourage those owners to bring their older vehicles in for the required service, the automaker will disperse $100 prepaid cards for use at their discretion. The program is offered to owners of certain model year Jeep Grand Cherokee, Jeep Liberty, Chrysler Aspen, and Dodge Durango sport-utility vehicles, as well as certain Dodge Dakota and Ram trucks. Owners of the affected Grand Cherokees will have the option instead to take a $1,000 consideration toward the purchase of a new vehicle or for parts and service. The offers are only being extended under certain specific criteria, though. So if you think that could be you, you'll want to read through the conditions in the second announcement below. STATEMENT: CONTROL MODULE August 31, 2015 , Auburn Hills, Mich. - FCA US LLC is recalling an estimated 158,671 SUVs in the U.S. to help protect their control modules from static buildup that may potentially disable the vehicles' windshield wipers. An investigation by FCA US discovered static buildup may occur if the vehicles' windshield wipers are activated during dry conditions. Significant static buildup may affect a control module that powers the wipers. The Company is unaware of any related injuries or accidents. Affected are model-year 2014 Jeep Cherokee SUVs. An estimated 18,366 vehicles will be recalled in Canada, as will an estimated 3,582 in Mexico and 26,049 outside the NAFTA region. Dealers will install a ground strap to the control module to eliminate the potential for static buildup. Customers will be advised when they may schedule service, which will be performed at no cost.

2016 Ram 3500 Heavy Duty now offers 900 lb-ft of torque

After last year's bump to a massive 865 lb-ft of torque for its 2015 3500 Heavy Duty pickup, Ram certainly isn't taking a rest. The model already offers the best towing capacity and most torque in its class, but both figures are growing even higher for the 2016 model year. Now, customers that really need some grunt can order the Cummins 6.7-liter inline-six diesel in the 3500 with a staggering 900 pound-feet of torque and 385 horsepower. Ram claims that this huge figure is the most torque ever available in a mass production vehicle, and it tops the 2015 model by a healthy 35 lb-ft. The added grunt comes thanks to adjustments to the fuel delivery and the turbo's boost, and to better handle things, the rear axle gear now is held with 16 bolts, rather than 12. The tweaks also push the tow rating to an SAE J2807-certified 31,210 pounds, which is absolutely monumental. While not available with the 900 lb-ft version of the Cummins, the Ram 2500 also sees a tiny boost in its max tow rating. The trucks are now capable of hauling up to 17,980 lbs, versus 17,970 lbs last year. The 2016 Ram Heavy Duty trucks go into production in the third quarter and should start arriving at dealers during the fourth quarter of 2015. Prices for the 3500 start at $33,185 and $32,680 for the 2500, after the $1,195 destination charged, respectively. The company hasn't yet announced the cost for the 3500 with the 900 lb-ft Cummins diesel. 2016 Ram Heavy Duty Widens its Leadership Gap With a Triple-decker Presence: Best-in-class Power, Towing Capacity and Payload Capacity • 2016 Cummins 6.7-liter calibration hits a best-in-class 900 lb.-ft. of torque. The most torque ever offered in a mass-production vehicle • 2016 Ram 3500 crushes the competition with up to 31,210 pounds of SAE J2807-spec.