2021 Ram 1500 Classic Slt on 2040-cars

Auto blog

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

Hypermiling a Ram 1500 EcoDiesel to 38.1 mpg

You never quite know what Wayne Gerdes has up his sleeve. The man who coined the term hypermiling is always looking for adventurous ways to prove that anyone – even you... yes, you – can eke out more miles per gallon just by changing the way you drive. Saying that is easy. Proving it by going on outlandish cross-country drives is hard. But for Gerdes and his team of fuel economy fiends over at CleanMPG, hard is half the fun. Our latest adventure appeared, at first glance, to be nearly impossible. Which is why we always answer the phone when Gerdes calls. He likes to take journalists along on his drives, not only to try teach us how to hypermile but also to prove that we can be taught. The first time I 'helped' him and his team was when we got over 30 miles per gallon in a 2011 Ford F-150 XLT with the EcoBoost 3.5-liter V6. The EPA rated that truck with at just 16 mpg in the city and 22 on the highway. So, we'll count that trip as a success. Next up was a cross-country drive last fall in a trio of Audi TDI vehicles to prove that you don't need to drive extra slow to beat the EPA numbers. In fact, we made it from Los Angeles to New York City in just over 46 hours, cramped but not cranky. We had once again proven that how you drive is hugely important to your fuel usage. Our latest adventure appeared, at first glance, to be nearly impossible. The EPA says that the Ram 1500 EcoDiesel we would be driving gets just 22 combined mpg (19 city and 27 highway). Gerdes' idea was to drive it as far north from Houston, TX towards Detroit, MI as we could go on one tank. The day before we left, our itinerary got an extra stop. Instead of taking one of the official Shell Eco-marathon prototype vehicles to Detroit, it was decided to bring the winning diesel-powered prototype from the just-finished event to The Henry Ford Museum, where it had been arranged the car would be displayed. The winning car was built by a small team (just four students) from Sullivan High School in Sullivan, IN, who managed to beat a number of college teams with a score of 1,899.32 mpg. That target would be a bit out of reach for the Ram, but could we get 1,000 miles from the tank? Since the truck has a 26 gallon tank (officially, anyway), that would mean the EPA says we could only go 702 miles, assuming all highway driving. Could we make up 300 miles with careful driving? That spells both challenge and fun.