2010 Porsche Cayenne All Wheel Drive Heated Seats on 2040-cars

Auto blog

Jack Olsen built a Porsche 911 to drive every day and conquer Willow Springs

Almost two years ago we wrote about the 12-Gauge Garage Jack Olsen built to house his multifarious Porsche 911 - its 1972 bodywork hides four decades of Porsche parts, like the transaxle from a 1977 911 and the engine from 1995 911, for example. It weighs 2,400 pounds and has 272 horsepower, and Olsen uses it daily driving and for track days, the latter excursions featuring homemade, bolt-on aero parts. German magazine Auto Bild stopped by Olsen's house to look in on the Porsche called "Black Beauty II," and we get a few more details about the mods he's made, like swapping out for fiberglass body panels and welding Fuchs wheel centers to wider Corvette barrels so he could run different tires. Most importantly, though, Olsen divulges his passion for lowering his lap time at Willow Springs. Randy Pobst set the lap record for a production car around the 2.5-mile Big Willow track in a Porsche 918 Spyder at 1:23.54 during a Motor Trend test (the outright record, according to Willow Springs, is held by Michael Andretti at 1:06.050 in a CART car). Further down the list, Steve Millen drove a 415-hp 911 GT3 RS around the same track in 1:33.14 - a car 600 pounds heavier than Olsen's. Over the past 14 years of tinkering with his car, Olsen says his data shows his lap time is now down to 1:26.88, achieved on the day of filming the Auto Bild video. That time would put him in between the 1:26 flat posted by Dominik Farnbacher in a 608-hp Dodge Viper SRT-10 ACR and the 1:28.93 put up by Pobst in a 400-hp, 991-series 911. You can hear Olsen tell it in his own words in the video.

Porsche 911 GT3 RS facing delay over GT3 fire problems?

Porsche has never been afraid to introduce variants of its cars. However, its even higher spec, next-generation 911 GT3 RS may be delayed from its planned launch this summer while the engines in the standard GT3s (pictured above) are replaced.
A delay isn't certain, but executives want to make sure the high-strung mill is no longer a problem before they press forward with another model using it. Germany's Auto Motor und Sport asked Porsche CEO Matthias Müller about pushing back the launch, and he responded that it was too early to say. The company's current focus is making sure the engines get fixed and working on internal measures to prevent this kind of flaw in the future.
When fires claimed two 911 GT3s in Europe, Porsche initially stopped the model's sales and asked owners to stop driving them. It finally diagnosed the blazes as being caused by a loose screw on a connecting rod, which then resulted in crankcase damage and an oil leak. The company is replacing the engines on all 785 affected cars. A source told Autoblog that under 200 customers were actually affected, and the other cars were either at port or dealer lots. Hopefully, the recall doesn't postpone the road-going GT3 RS too far because we want to see what Porsche has up its sleeve.

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.