1986 Porsche 944 on 2040-cars

Auto blog

2014 Porsche 911 GT3 [w/video]

The Bearable Lightness Of Being
Start with a standard Porsche 911 Carrera and its 350-horsepower, 3.6-liter flat six-cylinder engine. Bore a crepe-thin slice of aluminum from each cylinder to get to 3.8 liters, add a wider track out back and two extra exhaust pipes and voila, you can append an S to the Carrera's name. Hang two sets of wet, multi-disc clutches along its spine and you can make that a 4, or a 4S. Bolt on two forced-induction compressors and piping, add two fender vents and comically wide rear tires and you've redeemed your ticket to a Turbo. Increase the boost pressure and swell the corral to 560 horses and you have the Turbo S, which is the Virginia Slims of the 911 line-up because it's come a long way, baby.
Or you can go in a different direction. At that second stop, grab the 3.8-liter and cart it over to the engineers at Porsche's development center in Weissach, Germany. If racing were meat, they would be among the alpha carnivores. The baseboards in their homes are probably painted with miniature billboards for motor oil and vintage cigarettes along the straights, red-and-white stripes around every corner.

Porsche announces plan to replace 911 GT3 engines

About a month back, we reported that Porsche was suspending delivery of its 911 GT3 due to reported incidents of the engine bursting into flames. A few days later, Porsche told owners of the new track-ready models not to drive their cars and had their local dealers pick up the cars in question. Just a couple of days ago, we reported that Porsche was working on a fix, and now we have the official details.
Following an internal investigation prompted by two such incidents, Porsche has confirmed that is has identified the problem as resulting "from a loosened screw joint on the connecting rod." The loose connecting rod, Porsche found, damaged the crankcase, which in turn resulted in oil leaking and then - in at least two cases - igniting.
Our source is unaware of Porsche being contacted by GT3 owners concerned about the impact of a replacement engine on their car's collectibility or resale value.

Are you the 2017 Porsche 911 GTS Targa?

Our spy shooters have caught a strange, mash-up beast wearing a Porsche badge. Superficially, this is a facelift for the 911 Targa that features new bumpers, door handles and a redesigned engine cover, along with new light graphics for the front and rear lights. But have a look around back, and you'll find two inboard exhaust pipes; they aren't right up against each other as on the 911 GT3, but are spaced about five inches apart. The shooters said the first time they saw that arrangement was last winter, on a convertible during testing. We saw it again more recently in spy shots of what was thought to be the 911 GTS coupe prototype at the track. But when the production GTS arrived, it wore the traditional quad-pipe at the corners. The theory put forward by the spy photog: the current GTS has a naturally aspirated engine, but facelifted prototypes they've been seeing all have turbo engines, so this could be the facelifted Targa coming in 2017, after the 991-model 911 gets a refresh. In that case, the GTS coupe prototype at the track would have also been a post-refresh, turbo-engined GTS. It's only a hypothesis, but more than one outlet has reported that Porsche is going all-turbo for the updated 2015 models – the new exhaust position and those 911-Turbo-like vents could be their identifiers. We expect to find out when the lineup is unveiled at the 2015 Geneva Motor Show, possibly codenamed 992 instead of 991.2.