Certified Clean Carfax 46k Miles! Navigation,bose,sport Chrono,19alloys! on 2040-cars

Auto blog

Porsche reportedly working on new turbocharged flat-four boxer engine?

These days, we've seen just about every automaker dropping cylinders in an effort to appease tightening fuel economy and emission standards - and Porsche is no exception. Nearly three years after introducing an all-new V6 powerplant under the front hood of its Panamera sedan (launched with a range of V8 engines) comes word that Porsche is working on an all-new turbocharged flat-four boxer to replace the flat-six engines mid-mounted in its Cayman and Boxster models.
Specifics have yet to be learned, but reports say the engine is a derivative of the current 3.8-liter six (shown above) found under the rear decklid of the Carrera S, yet with two fewer cylinders. Fitted with a turbocharger, direct-injection and the automaker's VarioCam Plus, the new all-aluminum 2.5-liter flat-four will likely develop upwards of 350 horsepower and 360 pound-feet of torque. Redline should be about 7,500 rpm. Initial indications say that Porsche will only offer the new engine with its seven-speed PDK dual-clutch automatic, tuned to take advantage of the low-end torque, but a traditional six-speed manual gearbox has not been ruled out. Despite the loss of two cylinders, enthusiasts will likely embrace the new engine as it promises to be lighter, more fuel efficient and more powerful than the 2.7-liter and 3.4-liter sixes in the Cayman/Boxster today.
Even though Porsche has been using Volkswagen Group engines for years (e.g., Cayenne V6, Cayenne Diesel and upcoming Macan), all indications are that the new flat-four will not be shared. Instead, it will be kept in-house for the automaker's sports cars and possible future fitment in an entry-level 911.

Audi CEO's Dieselgate arrest threatens fragile truce among VW stakeholders

FRANKFURT — The arrest and detention of Audi's chief executive forces Volkswagen Group's competing stakeholders to renegotiate the delicate balance of power that has helped keep Audi CEO Rupert Stadler in office. Volkswagen's directors are discussing how to run Audi, its most profitable division, following the arrest of the brand's long-time boss on Monday as part of Germany's investigations into the carmaker's emissions cheating scandal. The supervisory board of Audi, meanwhile, has suspended Stadler and appointed Dutchman Bram Schot as an interim replacement, a source familiar with the matter said on Tuesday. Schot joined the Volkswagen Group in 2011 after having worked as president and CEO of Mercedes-Benz Italia. He has been Audi's board member for sales and marketing since last September. The discussions risk reigniting tensions among VW's controlling Piech and Porsche families, its powerful labor representatives and its home region of Lower Saxony. VW has insisted the development of illegal software, also known as "defeat devices," installed in millions of cars was the work of low-level employees, and that no management board members were involved. U.S. prosecutors have challenged this by indicting VW's former chief executive Martin Winterkorn. Stadler's arrest raises further questions. Audi and VW said on Monday that Stadler was presumed innocent unless proved otherwise. Munich prosecutors detained Stadler to prevent him from obstructing a probe into Audi's emissions cheating, they said on Monday. Stadler is being investigated for suspected fraud and false advertising. Here are the main factors deciding the fate of Audi. Background: Audi's role in Dieselgate Volkswagen Group was plunged into crisis in 2015 after U.S. regulators found Europe's biggest carmaker had equipped cars with software to cheat emissions tests on diesel engines. The technique of using software to detect a pollution test procedure, and to increase the effectiveness of emissions filters to mask pollution levels only during tests, was first developed at Audi. "In designing the defeat device, VW engineers borrowed the original concept of the dual-mode, emissions cycle-beating software from Audi," VW said in its plea agreement with U.S. authorities in January 2017, in which the company agreed to pay a $4.3 billion fine to reach a settlement with U.S. regulators.

Porsche 911 GT3 RS spec sheet leaked, promises 500 hp

Axis of Oversteer has three pages of what's purported to be the spec sheet for the Porsche 911 GT3 RS, and it's got a few bolded items noting key differences with the already spectacular 911 GT3. Prime among them is its output, pegged at exactly 500 horsepower and 339 pound-feet of torque, which looks at first blush to be a minor bump: just 25 hp and 14 lb-ft over the GT3, and the redline drops 200 rpm to 8,800 rpm. If the document is accurate, though, there will be a hefty dose of weight loss to make the most of it. The bodyshell and doors are aluminum, carbon fiber reinforced plastic is used for those vented front fenders (the vanes are plastic), the front trunklid, the rear engine cover, and the rear wing, while the roof is made of magnesium and the side windows are polycarbonate. The bucket seats, door entry guards, and other interior trim pieces are also fashioned from CFRP, and it gets lightweight door panels with pull-loops. Elsewhere around the coupe, the body grows wider by 50 millimeters in front and 30 mm in back over a track that's 36 mm wider. There's a pit-lane speed limiter for track days, tinted taillights, an optional Clubsport package with a six-point seatbelt, and GT3 RS logos everywhere. It's looking more and more like this car was developed to define the word "epic." Featured Gallery Porsche 911 GT3 RS spec sheet Related Gallery 2016 Porsche 911 GT3 RS News Source: Axis of Oversteer Geneva Motor Show Porsche Coupe Performance 2015 Geneva Motor Show porsche 911 gt3