911s**impeccable Condition**, Beautiful Color Combonation on 2040-cars

Auto blog

Porsche 911 GT3 RS spec sheet leaked, promises 500 hp

Axis of Oversteer has three pages of what's purported to be the spec sheet for the Porsche 911 GT3 RS, and it's got a few bolded items noting key differences with the already spectacular 911 GT3. Prime among them is its output, pegged at exactly 500 horsepower and 339 pound-feet of torque, which looks at first blush to be a minor bump: just 25 hp and 14 lb-ft over the GT3, and the redline drops 200 rpm to 8,800 rpm. If the document is accurate, though, there will be a hefty dose of weight loss to make the most of it. The bodyshell and doors are aluminum, carbon fiber reinforced plastic is used for those vented front fenders (the vanes are plastic), the front trunklid, the rear engine cover, and the rear wing, while the roof is made of magnesium and the side windows are polycarbonate. The bucket seats, door entry guards, and other interior trim pieces are also fashioned from CFRP, and it gets lightweight door panels with pull-loops. Elsewhere around the coupe, the body grows wider by 50 millimeters in front and 30 mm in back over a track that's 36 mm wider. There's a pit-lane speed limiter for track days, tinted taillights, an optional Clubsport package with a six-point seatbelt, and GT3 RS logos everywhere. It's looking more and more like this car was developed to define the word "epic." Featured Gallery Porsche 911 GT3 RS spec sheet Related Gallery 2016 Porsche 911 GT3 RS News Source: Axis of Oversteer Geneva Motor Show Porsche Coupe Performance 2015 Geneva Motor Show porsche 911 gt3

2015 Porsche Panamera S First Drive

Porsche brought the Panamera in for its garage makeover and drove it out looking almost exactly the same. Turns out it was one of those fancy German refreshes where everything happens in places you can't immediately see, as we found recently on the 2015 Volkswagen Jetta TDI. The marquee revision across the lineup is under the hood, where every engine gets, at the very least, more power. Such is the case for the naturally aspirated V6 in the entry models, fitted with an increase of 10 horsepower for a total of 310. The same goes for the naturally-aspirated 4.8-liter V8, which lives only in the Panamera GTS now, and gets 10 more hp for a total of 430. That same V8, twin-turbocharged in the Turbo model, is graced with 20 more ponies for 520 hp. The mightiest marquee revision is saved for the S models, which surrender their use of the 4.8-liter V8 and get a 3.0-liter, all-aluminum, twin-turbocharged V6 in its place. It's a brand-new engine designed in-house and related to the 3.6-liter V6 in the base models, but with new features like a magnesium timing chain cover, variable camshaft timing for the intake and the exhaust valves, and a new fuel- injection system. Putting out 420 hp and 384 pound-feet of torque, it's got 20 more hp and 15 more lb-ft than the V8 it replaces. What's more, torque used to peak from 3,500 to 5,000 rpm, but the new torque curve maintains maximum twist from 1,750 to 5,000 rpm. It is less thirsty as well, posting an estimated fuel economy of 17/27 miles per gallon city/highway, besting the 16/24 city/highway of before. An improved stop-start mechanism contributes to this, as it cuts the engine earlier, and the coasting function benefits from a new disc clutch that can decouple the seven-speed PDK dual-clutch transmission from the driveline. As we wrote in our Panamera S E-Hybrid review, you'd need to be obsessed with the Panamera to notice the sheet metal changes around that engine. It's the perfect car to ask, oh so coyly, "Notice anything different about me?" while you stand there dumbfounded, silently thinking, "No." Here is your cheat sheet: the front and back ends are "tighter," meaning faintly more squared off, the front intakes are larger, the tailgate gets wider rear glass over the same-sized opening, the rear spoiler is wider, and the rear license plate bracket has been mounted lower. But even now that you know what the changes are, odds are still 200-to-1 against you actually noticing.

Porsche finally moving ahead with flat four engine

When Porsche released the first Boxster in 1996 and the first Cayman in 2005, the idea was to create an entry-level model for the German automaker's sports car range. The latest iterations of both closely related models, however, have begun to encroach dangerously on the 911's territory, particularly in their newest GTS specifications. That could be about to change, however, with the introduction of a four-cylinder engine for the compact mid-engined coupe and roadster.
According to Automotive News, Porsche is finally preparing to launch a new boxer four engine in the Boxster and Cayman, following years of speculation. The engine would be based on the same architecture as the company's famous flat six, but with two fewer cylinders to cut weight. Don't expect it to cut much in the way of performance, however: Porsche chief Matthias Muller indicates that the new engine could produce as much as 395 horsepower - significantly more than even the 340hp flat six in the Cayman GTS, suggesting that the engine could even find its way into the 911 as well.
It's no more clear which markets would get the four-cylinder engine, either. But wherever it is offered and in whichever form, it wouldn't be the first time we'd see a Porsche with a four-pot engine. Not by a long shot. Both the classic 912 and 356 were powered by boxer fours, as was the 914 - not to mention the 718 pictured above and the iconic 550 Spyder. The front-engined 924, 944 and 968 packed inline-four engines, but the last of those were discontinued in the 1990s. The prospect of a four-cylinder Boxster/Cayman has been rumored for many years now, most recently joined by the possibility of a four-pot Macan as well.