2013 Porsche 911 Carrera S Coupe! 1ownr! Navigation! Pdk! Prem Pkg Plus! Perfect on 2040-cars

Auto blog

Porsche 911 GT3 RS spec sheet leaked, promises 500 hp

Axis of Oversteer has three pages of what's purported to be the spec sheet for the Porsche 911 GT3 RS, and it's got a few bolded items noting key differences with the already spectacular 911 GT3. Prime among them is its output, pegged at exactly 500 horsepower and 339 pound-feet of torque, which looks at first blush to be a minor bump: just 25 hp and 14 lb-ft over the GT3, and the redline drops 200 rpm to 8,800 rpm. If the document is accurate, though, there will be a hefty dose of weight loss to make the most of it. The bodyshell and doors are aluminum, carbon fiber reinforced plastic is used for those vented front fenders (the vanes are plastic), the front trunklid, the rear engine cover, and the rear wing, while the roof is made of magnesium and the side windows are polycarbonate. The bucket seats, door entry guards, and other interior trim pieces are also fashioned from CFRP, and it gets lightweight door panels with pull-loops. Elsewhere around the coupe, the body grows wider by 50 millimeters in front and 30 mm in back over a track that's 36 mm wider. There's a pit-lane speed limiter for track days, tinted taillights, an optional Clubsport package with a six-point seatbelt, and GT3 RS logos everywhere. It's looking more and more like this car was developed to define the word "epic." Featured Gallery Porsche 911 GT3 RS spec sheet Related Gallery 2016 Porsche 911 GT3 RS News Source: Axis of Oversteer Geneva Motor Show Porsche Coupe Performance 2015 Geneva Motor Show porsche 911 gt3

New Porsche 4-cyl engines to range from 1.6L to 2.5L

Recent rumors of a turbocharged, flat-four-engine from Porsche for the Boxster (pictured testing above), Cayman and maybe other models go back over a year. The latest scuttlebutt indicates that there could be three variants on the horizon with 1.6-, 2.0- and 2.5-liter displacements and power as high as 360 horsepower.
Car magazine in the UK claims to have access to the specifications for the project and thinks the 2.0- and 2.5-liter versions are guaranteed for production for the Boxster and Cayman. However, it believes a question mark still looms over the 210-hp 1.6L because the engine would go into a new, smaller sports car that still doesn't have a green light for production.
Regardless of displacement, the new fours would be turbocharged and direct-injected. The 2.0-liter would produce around 286 hp and 295 pound-feet of torque, and the 2.5-liter would make about 360 hp and 347 lb-ft. Earlier reports pegged some parts sharing with the current flat-six.

Motor Trend puts Chevy Camaro Z28 and Porsche 911 GT3 Head 2 Head

Motor Trend admits, "This is an unfair comparison." But that doesn't make it any less fun to watch when they pit a Camaro Z/28 against the Porsche 911 GT3. The former has a 7.0-liter V8 with 505 horsepower and 481 pound-feet of torque shifted through a six-speed manual. The latter has a 3.8-liter flat-six with 475 hp and 324 lb-ft shifted through a seven-speed dual-clutch transmission. Yet those are only the little disparities – the big disparities are mass and money: the Camaro weighs 3,882 pounds and costs $76,150 as-tested, the Porsche weighs 3,267 pounds and costs $145,785. But they're both about hardcore performance, so MT takes them out on the street, to the drag strip, to the parking lot for figure eights and a skidpad test, and finally to Big Willow for Randy Pobst to give his professional assessment. Remember when a lotta people spent a lotta time debating Pirates vs. Ninjas? This is like that, only it's the "haul-ass good-time car" vs. the "track surgeon." Enjoy the debate in the video.