2012 Porsche 911 Carrera Cabriolet Black Edition Cpo Warranty on 2040-cars

Auto blog

Porsche 911 GT3 RS spec sheet leaked, promises 500 hp

Axis of Oversteer has three pages of what's purported to be the spec sheet for the Porsche 911 GT3 RS, and it's got a few bolded items noting key differences with the already spectacular 911 GT3. Prime among them is its output, pegged at exactly 500 horsepower and 339 pound-feet of torque, which looks at first blush to be a minor bump: just 25 hp and 14 lb-ft over the GT3, and the redline drops 200 rpm to 8,800 rpm. If the document is accurate, though, there will be a hefty dose of weight loss to make the most of it. The bodyshell and doors are aluminum, carbon fiber reinforced plastic is used for those vented front fenders (the vanes are plastic), the front trunklid, the rear engine cover, and the rear wing, while the roof is made of magnesium and the side windows are polycarbonate. The bucket seats, door entry guards, and other interior trim pieces are also fashioned from CFRP, and it gets lightweight door panels with pull-loops. Elsewhere around the coupe, the body grows wider by 50 millimeters in front and 30 mm in back over a track that's 36 mm wider. There's a pit-lane speed limiter for track days, tinted taillights, an optional Clubsport package with a six-point seatbelt, and GT3 RS logos everywhere. It's looking more and more like this car was developed to define the word "epic." Featured Gallery Porsche 911 GT3 RS spec sheet Related Gallery 2016 Porsche 911 GT3 RS News Source: Axis of Oversteer Geneva Motor Show Porsche Coupe Performance 2015 Geneva Motor Show porsche 911 gt3

Porsche calling in two Cayennes

We regularly see recalls addressing all manner of problems (or potential problems) affecting any number of vehicles: hundreds, thousands, even millions. Some are too small to bother reporting, but once in a while one comes along that's so ridiculously small that we couldn't pass it over. Like this latest one from Porsche. "Due to a manufacturing error," says the National Highway Traffic Safety Administration in the notice below, "the suspension alignment on the front and rear axles may not have been performed correctly and the screw connections of the camber, toe and caster may not have been tightened with the specified torque." The recall affects the 2015 Cayenne... but just how many of them, you ask? Two. Not two hundred, not two thousand, but two: one Cayenne Diesel and one Cayenne S, manufactured between November 26 and... November 27, 2014. That very well might make this the most methodically German recall in the history of recalls. If you happen to be the owner of one of those two vehicles, expect to hear from Porsche with instructions to bring your Cayenne in to have the suspension re-aligned and the screws tightened. RECALL Subject : Front and Rear Alignment may be Incorrect Report Receipt Date: DEC 29, 2014 NHTSA Campaign Number: 14V824000 Component(s): SUSPENSION Potential Number of Units Affected: 2 Manufacturer: Porsche Cars North America, Inc. SUMMARY: Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 Cayenne Diesel and Cayenne S vehicles manufactured November 26, 2014, to November 27, 2014. Due to a manufacturing error, the suspension alignment on the front and rear axles may not have been performed correctly and the screw connections of the camber, toe and caster may not have been tightened with the specified torque. CONSEQUENCE: If the suspension alignment was incorrectly performed, vehicle handling could be reduced, increasing the risk of a crash. REMEDY: Porsche will notify owners, and dealers will perform a front and rear suspension alignment, and check the screw connections for the proper torque, retightening as necessary, free of charge. The manufacturer has not yet provided a notification date. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AF04. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Autocar pits Porsche 911 Turbo S against Formula 4 racer

There is a long-running argument among performance car fans: power vs. weight. In one corner you get cars generally with small engines making modest numbers but able to corner like they are telepathic, and in the other there are big thumping mills that are rocketships in a straight line but lumber in the turns. Autocar takes an interesting look this continuum in a recent video pitting a 552-hp Porsche 911 Turbo S against a 185-hp Formula 4 racecar. It hopes to find whether the Porsche's huge power advantage is enough to defeat the better grip and aero offered by the nimble racer.
There's no doubt that the Porsche is an utterly fantastic road car. The 911 Turbo looks mean with all of those intakes to suck in cool air, and it backs up the posture with huge amounts of grip available thanks to its all-wheel drive-system. However, at 3,538 pounds, it's a bit of a porker compared to the 1,135-pound Formula 4 car. The open-wheel car boasts just a 2.0-liter naturally aspirated four-cylinder from Ford and a six-speed sequential-manual gearbox, but it has loads of downforce to make up for it.
It shouldn't be a surprise that the formula car wins in the corners. After all, that's what it's made for. So do you think the massive horsepower superiority of the Porsche is enough to even the playing field? Scroll down to watch the video and find out, and even if you're not curious of the winner the 911 does some mean powerslides.