1996 Porsche 911 Carrera 2dr Carrera Cpe 6-spd Manual on 2040-cars

Auto blog

New Porsche 4-cyl engines to range from 1.6L to 2.5L

Recent rumors of a turbocharged, flat-four-engine from Porsche for the Boxster (pictured testing above), Cayman and maybe other models go back over a year. The latest scuttlebutt indicates that there could be three variants on the horizon with 1.6-, 2.0- and 2.5-liter displacements and power as high as 360 horsepower.
Car magazine in the UK claims to have access to the specifications for the project and thinks the 2.0- and 2.5-liter versions are guaranteed for production for the Boxster and Cayman. However, it believes a question mark still looms over the 210-hp 1.6L because the engine would go into a new, smaller sports car that still doesn't have a green light for production.
Regardless of displacement, the new fours would be turbocharged and direct-injected. The 2.0-liter would produce around 286 hp and 295 pound-feet of torque, and the 2.5-liter would make about 360 hp and 347 lb-ft. Earlier reports pegged some parts sharing with the current flat-six.

Porsche Classic launching branded motor oil for air-cooled boxer engines

It's hard not to love the look of a classic Porsche. Whether it's the upside-down bathtub styling of the 356 or the gradual evolution of the 911, there is a little beauty in all of them. However, the older they get, the more that needs repaired to keep them on the road. Porsche Classic is helping out, though, by introducing its own brand of motor oil for the demands of the company's vintage, air-cooled engines.
Developed at the Porsche Development Centre in Weissach, Germany, Porsche Classic Motoroil comes in two weights - 20W-50 for the 356, 914 and 911 models up to the 2.7-liter G-Model and 10W-60 for 3.0-liters-and-up engines through the 993-chassis 911. The company claims that the air-cooled engines have different heat demands than traditional, water-cooled units, and this oil is made to meet those requirements.
According to Porsche, modern, synthetic oils are sometimes too effective when it comes to old engines. They are fantastic at sopping up debris, but those deposits are often holding archaic seals together. Suddenly removing them can cause leaks. The new oil is specifically designed to work with the old-fashioned materials found in its classics. The company also knows that most owners aren't driving their vintage cars everyday. So this formulation is more alkaline that normal to neutralize acids that they build up and corrode components.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.