1978 Porsche 911 Sc Targa Survivor Original Fast Clean on 2040-cars

Auto blog

Porsche reveals new 911 Turbo Cabriolets, starting from $160,700*

Porsche has come a long way from the days when its entire model line revolved essentially around the 911, but its prototypical rear-engined sports car is still what it's known for best, and still keeps the German automaker pretty busy. With a seemingly endless array of variations on the theme, the 911s just keep on coming until a new generation arrives and then it starts all over again. And what we have here is the new king of the hill (for now, anyway).
Set to debut at the Los Angeles Auto Show a little less than two months from now are the new Porsche 911 Turbo Cabriolets. And no, that's not a typo: that's cabriolets, plural, because what you're looking at are two new models. First up is the 911 Turbo Cabriolet, whose 3.8-liter twin-turbo flat-six develops 520 horsepower, driving the droptop to 60 miles per hour in 3.3 seconds. That's Porsche's claim, and we have a feeling it's a bit conservative. But if that's still not enough, the 911 Turbo S Cabriolet adds an extra 40 hp for a total of 560 to drop the benchmark acceleration run down to 3.1 seconds.
That makes the new topless Turbos 30 horses stronger and 0.2 seconds quicker than the respective models they replace, but the weight penalty involved with replacing a fixed roof with a folding one (and the necessary structural reinforcement) does make the new 911 Turbo Cabs a smidgen more lethargic than their contemporary coupe counterparts, which run the gauntlet in 3.2 and 2.9 seconds in standard Turbo and upgraded Turbo S specs, respectively. They only lose a single tick on the top speed, though, which clocks in at a follicle-tickling 195 mph in either spec. Otherwise the specifications are as identical as you might expect.

Porsche reveals new 911 GT3 R at the Nurburgring

On any given weekend, you're bound to find gaggles of Porsche 911s zipping around most any race track. Now Porsche has revealed its latest competition model at no less fitting a location than the Nurburgring. The new 911 GT3 R replaces the existing version, slotting in below the 911 RSR. It's based closely on the road-going 911 GT3 RS, and retains the same 4.0-liter naturally aspirated flat-six with direct injection and variable valve timing, but tuned to deliver over 500 horsepower, transmitted to the rear wheels through a six-speed sequential paddle-shift gearbox and mechanical limited slip differential. The wheelbase has been stretched over three inches for better weight balance compared to the outgoing GT3 R, further optimized by more lightweight components and a central radiator to lower the center of gravity. The lightweight bodywork is made of aluminum, steel, and carbon fiber, and for the first time all of the glass (including the windscreen) has been replaced by plexi. Stopping power is provided by six-piston aluminum monoblock calipers gripping 380-millimeter steel discs up front, with four-piston calipers and 372-mm discs at the back. The safety fuel cell can now hold 120 liters of fuel with a cut-off safety valve, the doors and windows can be removed, and the escape hatch is bigger, too. All of this adds up to the promise of a more competitive GT3 R ready to take on the competition, available to privateer racing teams from December for 429,000 euros before tax – working out to about $487k at current exchange rates. World premiere at the Nurburgring Lighter, more economical, faster: the new 911 GT3 R Stuttgart. Based on the 911 GT3 RS production sports car, Porsche has designed a customer sport race car for GT3 series around the world: The 911 GT3 R. In developing the more than 368 kW (500 hp) racing nine-eleven, special attention was paid to lightweight design, better aerodynamic efficiency, reducing consumption, improved handling, further optimised safety as well as lowering service and spare parts costs. Adopted from its production sibling, the 911 GT3 R features the distinctive double-bubble roof, and the wheelbase which had been lengthened by 8.3 centimetres compared to the previous generation. This ensures a more balanced weight distribution and more predictable handling particularly in fast corners corners in comparison to the previous GT3 R.

Porsche offers design walkthrough of Panamera Sport Turismo

The Porsche Panamera Sport Turismo was arguably the best concept car of 2012, and Porsche has been building upon that momentum by teasing us with videos of its first-ever station wagon design. After showing us some driving shots of the Sport Turismo, Porsche released a more in-depth and behind-the-scenes look at what it took to take the Panamera shooting brake from a full-scale clay model to the final product we saw on stage at the Paris Motor Show. In the video, Michael Mauer, Porsche style director, and Mitja Borkert, general manager advanced design style, both give a little insight about what went into creating the Sport Turismo Concept.
More than just a station wagon version of the Panamera, the Sport Turismo has a totally distinctive look nose to tail. Some of the key elements the designers touch on in the video include the Porsche-signature raised front fenders, the wide rear shoulders, the front wing inspired by the 918 Spyder, and even some of the car's unique touches, including the headlights and the three-dimensional "Porsche" lettering across the liftgate made from glass. One of the more exciting aspects of the concept - which is sadly just glossed over in the video - is the rear liftgate spoiler that features "variable aerodynamics" that sounds like it acts similar to the retractable spoiler on the current Panamera.
We still don't know if the Panamera Sport Turismo will make it into production, but if you want to see what went into creating this exciting concept car and see the different build phases designers went through to create the Paris show car, check out the video by scrolling below.