Manual Convertible Coupe Roadster Gxp 2.0l Turbo Cd Leather 18" Chrome Wheels on 2040-cars

Auto blog

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Junkyard Gem: 1996 Pontiac Grand Am SE Coupe

The Grand Am was the best-selling Pontiac model in the United States for every year of the 1990s, and it outsold most of its N-Body platform-mates (including the Chevrolet Corsica/Beretta) during nearly all of that decade. A sporty-looking compact with two or four doors, the Grand Am offered true 1990s radness—and, in some cases, respectable performance — at a good price. Today's Junkyard Gem is a nicely preserved example of the facelifted 1996 Grand Am, found in a Denver-area car graveyard. This is an SE Coupe with base engine and transmission, the most affordable Grand Am available in 1996. List price was $13,499, or about $26,523 in 2023 dollars. The factory-issued Monroney sheet for this car was still inside, so we can see that the original buyer got the car at Bob Ruwart Motors in Wheatland, Wyoming (about 175 miles up I-25 from this Pontiac's final parking spot), and paid a total of $16,054 ($31,543 in today's money) after the cost of options and the destination charge. The '96 Grand AM SE buyer had to pay extra for cruise control, air conditioning, power windows, rear glass defogger and other features we now take for granted on new cars. The base engine was the 2.4-liter Twin Cam four cylinder, a member of the screaming Oldsmobile Quad 4 family. This one was rated at 150 horsepower and 155 pound-feet. A 3.1-liter V6 with 155 horses and 185 pound-feet was an option. If you got the V6 in your '96 Grand Am, however, you couldn't get a manual transmission. This car has a proper five-speed manual, which made for fun driving with the high-revving Twin Cam engine in a machine weighing just 2,802 pounds (which is quite a bit less than what the current Honda Civic weighs). It traveled just over 160,000 miles during its 27 years on the road. The body and interior were still in fairly good condition when the car arrived here, so we can assume that some expensive mechanical problem doomed this car. Perhaps the original clutch wore out and the owner didn't consider it worth replacing. After all, a mid-1990s Detroit two-door with a transmission most people can't drive isn't worth much these days. Though nobody knew it when this car was new, the Grand Am would be gone in nine years and Pontiac itself would get the axe five years after that. It makes the ordinary extraordinary. Husbands and wives would argue for 12 hours over who got to drive the Grand Am, if we are to believe this ad. Proud sponsor of the 1996 Olympic team.

World's only 1964 Pontiac XP-833 Banshee coupe for sale by Kia dealer

It seems like there has been a spate of especially odd car sales in the first part of this especially odd year, from the numerous barn finds and homebrew specials to the time capsule cars — like the BMW wrapped in a protective bubble for 23 years. Napoli Kia in Milford, Connecticut, brings us another, via Motor1. Len Napoli is the dealership principal and die-hard Pontiac maven; his father opened Napoli Pontiac in 1958, and Len held onto the franchise until the early 2000s, just before GM shuttered the brand that built excitement. Napoli got hold of the 1964 Pontiac Banshee XP-833 coupe concept, and put the car up for sale through his Kia dealership for $750,000. The exceptional price comes from the fact that Pontiac built two Banshee concepts in 1964, one this silver coupe with a red interior, the other a white roadster, making each concept a one-of-one collector car.      Motor Trend wrote a detailed piece on this one in 2013, the editorial tour hosted by Bill Collins, the Banshee's lead engineer. The short story is that GM exec John Z. DeLorean — yes, him —  gave approval to a small crew at Pontiac to create a two-seater sports car to compete with the Mustang, because GM had nothing to fend off the four-seat coupe that would sell one million units in just 18 months on the market. Collins and his team took inspiration from the 1963 Corvair Monza GT concept, working up a fiberglass body over a steel frame, with a 230-cubic-inch overhead-cam straight-six producing 165 horsepower and 216 pound-feet of torque, a four-speed manual transmission, and 9.5-inch drum brakes at all corners. The idea was that the XP-833 would be "an affordable and fun two-seat sports car," the concept demonstrating the base-model price leader offering a lengthy list of options for those who wanted more. The white roadster, in fact, fitted a 326 cubic-inch V8 under the hood. Rumor says that Chevrolet execs didn't like having another two-seater sports car in the GM fold, especially one with a fiberglass body that held weight down to 2,200 pounds. GM execs took one look at the two concepts in 1965 and shut the project down. The two XP-833s lived in a garage for years, Collins and his colleague Bill Killen getting permission to buy the cars from GM in 1973 before Collins left to help engineer the DeLorean DMC-12. It wasn't until just before Collins departed that the XP-333 got the name Banshee.