Base Convertible 2.4l Cd Rear Wheel Drive Aluminum Wheels 4-wheel Disc Brakes on 2040-cars

Auto blog

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

This massive 'Knight Rider' KITT model costs over $1,400

A new model of the famed Pontiac Firebird from the 1980s TV show Knight Rider is here, and it's massive. The shadowy flight into the dangerous world of this subscription-based kit by DeAgostini will result in a car that measures nearly two feet long, cost more than $1,400, and take you over two years to complete. For years, subscription-based model kits have been a tradition for hobbyists in Europe and Asia. Should you sign on, each week you'll receive a package in the mail that includes a few parts for the model and some literature on the subject. Usually there are additional collectibles and accessories, like a display case. The DeAgostini KITT kit, for example, begins with the hood for the first issue. The asymmetric bulged and scooped body panel comes with a several smaller body pieces and a small screwdriver. Issue two comes with the front fascia, KITT's red scanner light, and three of the six driving lights. Issue three gives you a tire, wheel and brake components for one of the four corners. And so it goes. When all is said and done, you'll receive 110 such packages over a span of so many weeks. In other words it'll take two years and one-and-a-half months to complete the black, 1:8 scale Pontiac. There are some discounted prices for the first few issues to get you hooked, but once you get settled in the regular price for each issue is ˆ10.99 ($13.36 USD). Here's a preview the 16-page pamphlet that accompanies the first issue. By the end, you should have a pretty comprehensive compendium of the Knight Rider series as well. The issues are available on newsstands, but subscribers get additional gifts — two 1:43 scale models, one of KITT and one of his nemesis KARR. And for an additional ˆ1.00 per issue, you'll receive an acrylic display case. As for the Knight Industries Two Thousand itself, the car appears to be incredibly detailed. As depicted on the DeAgostini website, the hood, doors, trunk and T-top roof panels all open. The red scanner lights up, the rear license plate rotates for three options, and there even seems to be a watch that commands the model to speak some of KITT's catch phrases. Knight Rider — or Supercar as it was called in Italy — told the episodic story of a former police officer, Michael Knight, who fought crime with his A.I.-powered car. As such, the TV car and the the model have a heavily computerized (by 1980s standards) dashboard and yoke steering wheel.