2007 Pontiac Solstice Convertible Auto Leather 18k Mi Texas Direct Auto on 2040-cars

Auto blog

Junkyard Gem: 1988 Pontiac LeMans Sedan

During the 1960s, the Pontiac LeMans was a sporty, rear-wheel-drive midsize car, the GTO's cheaper sibling. Through the 1970s and into the middle 1980s, the LeMans became a bit less youthful-looking but remained a traditional rear-wheel-drive Detroit machine with a V8 engine option. Then, starting in the 1988 model year, the LeMans name went onto a South Korean-built version of the misery-inducing, front-wheel-drive Opel Kadett E. These were dark days for the Pontiac marque; here's the proof, photographed at a San Francisco Bay Area self-service wrecking yard last month. This one didn't quite make it to the 100,000-mile mark. These cars were very, very cheap and sold reasonably well, but nearly all of the 1988-1993 LeManses are hatchbacks. I have seen a total of two Daewoo LeMans sedans during the last decade, and this is one of them. Under the hood, 74 raging Opel/Daewoo horsepower. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In this car's homeland, it benefited from extremely macho South Korean voiceovers in its television advertising. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the United States, the ads for the LeMans were all about the hatchback, and all about cheap excitement. Related Video: Featured Gallery Junked 1988 Pontiac LeMans Sedan View 12 Photos Auto News Pontiac

GM recalling 778,000 Cobalts and G5s, six deaths reported

General Motors has announced that it will be recalling 778,562 compact cars after six people were killed in accidents, partially due to the airbags' failure to deploy. An issue with the ignition switch is causing the airbag issues, as well as causing the engine and other components to shut off without warning. The recall covers the 2005 to 2007 model year Chevrolet Cobalt and 2007 Pontiac G5. (Note that the Cobalt pictured above is a 2009 model.)
According to a report from Automotive News, a number of factors can cause the ignition to switch out of the run position, including weights on the key ring, rough or bumpy roads or other "jarring" events. Any of these situations could lead to some vehicle components not functioning properly.
There have been five fatal front-impact crashes that took the lives of six people, although as a GM spokesman noted, all five of the crashes happened off road and at high speed. In each of these cases, though, the lack of airbags wasn't the only lethal factor - alcohol and failure to wear a seat belt also played a role. Outside of the fatal accidents, there have been 17 other crashes where airbags didn't deploy. It's unclear if any of these crashes were caused by the engine shutting off.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...