2.4l Engine Ecotec 2.4l Dohc 4-cylinder Sfi Aluminum Hood Convertible Top Glass on 2040-cars

Auto blog

What's driving the spike in air-cooled Porsche 911 prices

Classic car prices have been racing skyward in general, but prices for air-cooled (pre-1999) Porsche 911s are ascending like they're strapped to rocket boosters. It's been going on for years, and every year people are surprised by how outrageous it's getting: Classic Driver covered it this month, as did The Truth About Cars who included this example of a "scruffy" 1993 RS America with 215,000 miles asking $80K; Mike Spinelli at Drive riffed on it at length last year along with a host of classic-car-market observers; Porsche forums were at it two years ago; and let's not even get into the 993 Turbo, going for prices so high you have to lie down to look at them. Speed Academy has run a piece looking at why it's happening, one theory being that regular-guy owners are hopping on the runaway-price wagon without any good reason. As in the example of that high-mileage, scruffy 911 RS America at Bring a Trailer, the owner sees pristine examples valued by Hagerty at $170,000, and even though the average value is $93,238 he thinks something like, "Mine's got to be worth half of top dollar ..." The tide - even one rising on air - makes it hard to find decent prices. Then there is the flood of money into the market. In spite of articles that try to temper investors' outlooks on collectible cars, other articles in places like the Financial Times and the Guardian promote vintage metal as a safe place to put money and reap astonishing returns. Speed Academy thinks one side effect of high 911 prices is that responsible enthusiasts are turning their attention to cars like the BMW 2002, E30 M3, and E9 3.0CS, saying their prices are "sharply on the rise." The entire article is worth a read since it goes into markets far afield from pricey German steel, but incredibly, the entire piece was actually inspired by a 1997 Acura Integra R that sold for $43,000 on eBay. So while this could be the best time to get into the classic car market if you know what you're doing, it is certainly the best time to do your homework. Related Video:

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Enter now to win this impeccably restored 1969 Pontiac GTO

Autoblog may receive a share from purchases made via links on this page. Pricing and availability are subject to change. No donation or payment necessary to enter or win this sweepstakes. See official rules on Omaze.  Normally when we post about Omaze, it is about some kind of incredible car sweepstakes. Today, well, to be honest, it is more of the same, but in the case of this tastefully done 1969 Pontiac GTO, we don’t even care if you head over to the sweepstakes page to enter, just do it for the photos. ThatÂ’s right. As a self-described automotive photography snob myself, I have to say that the photos of this GTO are far and away the best IÂ’ve ever seen on Omaze. And while youÂ’re over there, might as well enter the drawing. Who doesnÂ’t want that lean, green, muscle machine in their driveway? IÂ’m more of a fastback Mustang guy, and even I was drooling over that GTO.  Win a Restored 1969 Pontiac GTO - Enter at Omaze Here are the specs of the restored 1969 Pontiac GTO in question, according to Omaze: Maximum Seating: 5 Engine: 461 ci fuel-injected V8 Transmission: Tremec TKO600 5-speed manual Drivetrain: RWD  Exterior Color: Verdero Green Interior Color: Black Maximum Horsepower: 575 hp Maximum Torque: 620 lb-ft Approximate Retail Value: $100,000  Cash Alt: $75,000 Special Features: Butler Performance-built EFI 461, Fast EFI v2.1, 3.73 Gears with Eaton Posi Traction, Wilwood 6-piston brakes with hydroboost, Ridetech Coilovers and muscle bars, Chassis Works billet drop spindles, staggered 18” Budnik billet wheels, Budnik steering wheel IÂ’m not the only one on the Autoblog staff who thinks this restoration is worthy of a little praise. News Editor Joel Stocksdale picked it above all the other current Omaze offerings for our holiday staff picks post. HereÂ’s what he had to say: “There are an awful lot of ways to build a restomod. And a lot of those ways can be boring or tasteless. This one is neither. This is a seriously classy Pontiac GTO. Under the hood is a 461 cu. in. V8 from Butler Performance that's based on an actual Pontiac V8, not just another Chevy engine. The whole thing is subtle with a low-key metallic green and clean gray wheels. There isn't any overly flashy chrome or decals. And the interior is the same with just an upgraded steering wheel, shifter and pedals in an otherwise stock cabin. Oh, and it has a manual.