Wheelchair Van on 2040-cars

Auto blog

Lutz says GM was working on 5th-gen Pontiac GTO

Bob Lutz was one of the forces behind bringing the Holden Monaro to the United States, as the ill-fated Pontiac GTO in 2004. And while that car received critical acclaim, it was a sales disappointment. Now, Road & Track is reporting that our suspicions were correct - Pontiac was working on a two-door, G8-based coupe before it was shuttered.
In that R&T article, which is no longer available online, Lutz explained that the new GTO would solve many of the issues found in the original. Car Advice speculates that the new model would have look like a rebadged version of the Holden Coupe 60 Concept from 2008, a conclusion we also came to.
That car would have been a big departure from the 2004 to 2006 GTO. It has an extremely long hood and short rear deck, with an almost fastback roofline and a wide greenhouse with a tall beltline. The wheel arches were very pronounced, and the chin and rocker panel splitters gave it a race-ready look. Would it have been enough to make the GTO work in the US? We think it might of, but it looks like we'll never know.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Junkyard Gem: 2001 Pontiac Grand Prix GTP

John DeLorean began his career working on Packard's Ultramatic Twin transmission, but he made his greatest mark on the automotive industry during his 1956-1969 tenure at GM's Pontiac Division. There, he helped develop the first production car engine with a quiet timing belt instead of a noisy chain, among other engineering feats, but his real fame came from the development of two money-printing models based more on marketing than machinery: the GTO and the Grand Prix. While the GTO gets all the attention now, the Grand Prix set the standard for the big-selling personal luxury coupes that sold like mad for decades to come. Today's Junkyard Gem is an example of the most powerful Grand Prix available at the turn of the century, found in a Denver-area self-service yard during the summer. The Grand Prix got front-wheel-drive for 1988 and a sedan version for 1990, but then something very beneficial happened in the 1997 model year: supercharging! Various flavors of the venerable 3.8-liter Buick V6 engine (itself based on the early-1960s Buick 215 V8 and thus cousin to the Rover V8) received Eaton blowers, starting in the 1992 model year. The Grand Prix didn't get its introduction to forced induction until the 1997 model year, but it kept the boosted option until the final Grand Prix rolled off the line in 2008 (the final Pontiac followed within a couple of years). This one made 240 horsepower, making it King of Grand Prix engines until the 2005 model year (when the GXP and its 303-horse V8 engine showed up). The very last year for a Grand Prix with a manual transmission was 1993 (there had been a three-pedal Grand Prix drought from 1973 through 1988, just to put things in perspective), so this car has the mandatory four-speed automatic. The Grand Prix lived on GM's W platform for its last two decades, making it sibling to the Impala, Regal, and Intrigue in 2001. Until the 2004 model year, every W-Body Grand Prix was built at Fairfax Assembly in Kansas City (no, the other Kansas City). Production of the final generation of Grand Prix took place in Ontario. It seems fitting that this car's final pre-crusher parking spot would be between two other GM products of the same era: a Monte Carlo and a Vibe. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.