1967 Pontiac Tempest Lemans on 2040-cars

Auto blog

This classic Firebird restomod swallowed a Prius

It takes an unusual eye to look at a 1967 Pontiac Firebird and see the Toyota Prius hidden inside. But that's just the kind of eye that a creative mechanic known online as "Bill the Engineer" has. Bill is updating his old Firebird into a true classic for the 21st century and has documenting the changes over at Priuschat and EcoModder. The TL,DR version of the story: he's replacing the worn-out powertrain with the gas-electric hybrid one from a Prius V, because it turns out the two vehicles have almost exactly the same wheelbase. Bill, who's from Columbus, Ohio and doesn't want his full name used, said in his posts on the conversion project that he's made many memories with this vehicle since buying it back in 1979. Since then, a few moves, a few decades, and some time in storage meant that the car would no longer function as he wanted it to. As he wrote, "when it comes to mice in the vehicles IT IS WAR." His solution is to make new memories and making a greener vehicle, and so we wanted to ask him how things have been going. Bill's been traveling a bit recently, but told AutoblogGreen that he's now figuring out the next steps for this amazing and complicated project. "I always plan things out before I do them," he said. That's the only way something like this can work. ABG: I think we have to start with what gave you the inspiration for this project. Was it simply that you had the two cars and wanted to see them merged into one cool mashup, or was it something else? "One day my wife wondered out loud if the car could be converted into a hybrid... The rest is history." Bill: I have been the owner of my 1967 Firebird convertible since 1979 when I bought it for $750.00. I drove it for years and made many memories. Afterward it was in storage for many years during which time mice at their way into the car and trashed the interior and wiring. I started working on a conventional restoration but always ran into major problems with hidden corrosion, electrical issues and an engine on its last legs. The car was never going to be as nice as I wanted going the conventional route. One day my wife wondered out loud if the car could be converted into a hybrid like our two daily driver Prii. That got me thinking about how it could be done. The rest is history... ABG: It looks like you started in late 2014. Have things gone well since then, or has it been one hassle after another? What has been the biggest setback, and what were the biggest victories?

Junkyard Gem: 2008 Pontiac G5 Coupe

In the grim early days of the Great Recession, the situation at GM's Pontiac Division didn't feel so great but there was some cause for optimism. The Solstice still had a certain glow, the Holden Commodore-based G8 had just arrived, and vehicle shoppers could stride into their local Pontiac showrooms and choose from eight different models bearing the iconic arrowhead badge. Yes, there were still new Torrents and Grand Prix and Vibes for sale in 2008, and of course the Cavalier-twin Sunfire had been replaced by the Cobalt-twin G5 by that time. Here's one of those G5s, found in a Colorado Springs car graveyard. It wasn't long after this car was built that everything went to hell for Pontiac. In April of 2009, GM announced that the Pontiac Division would be "phased out" over the next few years. Just to drive home the point, GM itself filed for Chapter 11 bankruptcy five weeks later. GM had already offed Oldsmobile—a marque dating back to 1897, making it nearly 30 years Pontiac's senior—five years earlier, so everybody knew there would be no reprieve in this case. Just to confuse everybody, Pontiac dealers offered a G3-badged Chevy Aveo (aka Daewoo Kalos) to sell alongside the G5 for 2009, but by 2010 there were just two new Pontiac models still standing in the United States: the G6 and the Vibe. Just over 70,000 G5s were sold in the United States during the 2007-2009 model years, making these cars fairly rare. The Cobalt/G5 ignition-switch fiasco of the mid-2010s really hammered their resale value at the time. Sometimes the definition of "Gem" refers to historical value, not the happier kind. Speaking of ignition switches, the key is still in this one. That generally means that a junkyard vehicle is a dealership trade-in or insurance total that couldn't sell at auction. This one is a base model, which listed at $15,675 (about $22,040 in 2023 dollars). The snazzier G5 GT started at $19,850 ($27,911 now) that year. The engine in this car is a 2.2-liter Ecotec four-banger rated at 148 horsepower and 152 pound-feet (the GT got a 2.4 with 171 hp/167 lb-ft). A five-speed manual was standard equipment, but the buyer of this car paid extra for the automatic. GM stuck these little "Mark of Excellence" badges on the fenders of its vehicles starting in 2005, then ditched the idea in 2009. I have vivid memories of this logo from the seatbelt buttons in my parents' 1973 Sportvan Beauville.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...