1970 Pontiac Grand Prix J Model No Reserve on 2040-cars

Auto blog

Distracted driver crosses center line and hits police car

Attentive driving and quick reflexes saved the life of a police officer in Hudson, WI, when an oncoming driver drifted into the officer's lane and struck his cruiser. According to KMSP, the officer was patrolling along a busy road through Hudson on March 31 when the crash occurred. Dash cam video from the patrol car which was released to local media shows the dramatic collision unfold. As the officer came around a mild left-hand curve, a white, 90s-era Pontiac Grand Am continued straight through the curve, across the center line, and directly into the officer's path. The officer was able to avoid a head-on collision, but the Pontiac still struck the driver's side of the patrol car. "Both the officer and the other driver are ok, however, this accident could have been much, much worse," said a Hudson Police Department official on the department's Facebook page. "So please remember to pay attention to your driving at all times when behind the wheel." Minnesota's Department of Public Safety estimates that one in every four crashes in the State of Minnesota are caused by distracted drivers. DPS believes that the actual number may be higher, but police often have difficulty proving distracted driving as the cause of a crash. Government/Legal Pontiac Driving Safety Coupe Police/Emergency

1969 Pontiac GTO Judge vs. 2006 GTO, which Goat gets your vote?

The Pontiac GTO was perhaps the most iconic muscle car of the '60s and early '70s. With its beefy V8 and color palette screaming for attention, it summarized in a single vehicle everything that made the era so appealing to many young people. Pontiac tried to collect just a few drops of that aura again in the 2000s with a revived GTO, but with decidedly mixed results. The performance was still there with its big V8, but the looks never quite lived up to the powertrain. Now, Generation Gap wants to know which of these Goats is the one to own.
Things are skewed immediately because the 2006 GTO here is a real ringer. It comes from famous tuner Ken Lingenfelter's collection, and it's a one-off example partially fettled by GM Performance boasting a twin-turbocharged LS2 V8 with a claimed 750 horsepower and a wide-body kit. This Goat definitely isn't what you're going to find just browsing for one to buy in the newspaper. Still, dip the throttle just a little, and this GTO pulls like a freight train. It's enough to turn the two hosts into giggling schoolboys behind the wheel.
The '69 GTO Judge here is also out of Lingenfelter's collection, but this one is all stock with a 400-cubic-inch (6.6-liter) V8 and a Ram Air hood for a claimed 366 hp. It might not have the unbelievable power of the turbo '06, but it makes up for it with style to spare.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...