2000 Pontiac Grand Am, No Reserve on 2040-cars

Auto blog

Porsche Boxster Spyder to get GT3's 4.0-liter flat six?

It's been a merry-go-round the past few months, the rumormill focused on what will power the next Porsche Boxster Spyder. First came hearsay of a flat-six going into the special edition of a model line known for its turbocharged four-cylinder engines. Then came tattling that the flat-six in question was the naturally aspirated, 4.0-liter from the 911 GT3. A couple of weeks ago we wrote " we'd be surprised if Porsche packed anything other than a turbocharged flat-four under the skin." But Autocar has a new report that, indeed, a downtuned version of the 500-horsepower 4.0-liter from the GT3's rump will move to the Boxster Spyder's midsection. The Autocar piece follows a Wheels magazine article from last November, and the prediction isn't outrageous. When Car and Driver reviewed the last Boxster Spyder, it wrote, "the hand-me-down six comes from the older 911 Carrera S, not to be confused with the new turbocharged 3.0-liter flat-six that powers the refreshed 911." If we can believe a recent report from Automobile about the 992-series 911 due later this year, the same thing is happening: The 991.2-series GT3 bequeaths its powerplant to the smaller sibling, and the 992-series GT3 moves to a 3.8-liter, twin-turbo flat-six with around 550 hp. Autocar quotes Andreas Preuninger, the Porsche engineer leading the development of all of these wunderkinds, saying of the Boxster earlier this year, "Natural aspiration is one of our main USPs. ... [We] think we can achieve throttle response and immediacy a little bit better with an atmospheric high-revving engine than any kind of turbo." We'll guess that means, by inference, that the GT3 is about to age out of naturally-aspirated university. The limited-edition Boxster Spyder might carry the torch with the 4.0-liter, with output somewhere around 430 hp. The Cayman GT4 could do the same. Or, who knows, an evolution of the 375-hp, 3.8-liter flat-six in the previous Boxster Spyder might burble out of left field. We expect to see the Boxster Spyder late this year. Until then, we'll wait to see what the merry-go-round says next time the Zuffenhausen horse comes around. Related Video: Featured Gallery Porsche 718 Boxster Spyder spy shots View 13 Photos News Source: Autocar via JalopnikImage Credit: CarPix Rumormill Pontiac Convertible Luxury Special and Limited Editions Performance porsche 911 gt3

Junkyard Gem: 2001 Pontiac Grand Prix GTP

John DeLorean began his career working on Packard's Ultramatic Twin transmission, but he made his greatest mark on the automotive industry during his 1956-1969 tenure at GM's Pontiac Division. There, he helped develop the first production car engine with a quiet timing belt instead of a noisy chain, among other engineering feats, but his real fame came from the development of two money-printing models based more on marketing than machinery: the GTO and the Grand Prix. While the GTO gets all the attention now, the Grand Prix set the standard for the big-selling personal luxury coupes that sold like mad for decades to come. Today's Junkyard Gem is an example of the most powerful Grand Prix available at the turn of the century, found in a Denver-area self-service yard during the summer. The Grand Prix got front-wheel-drive for 1988 and a sedan version for 1990, but then something very beneficial happened in the 1997 model year: supercharging! Various flavors of the venerable 3.8-liter Buick V6 engine (itself based on the early-1960s Buick 215 V8 and thus cousin to the Rover V8) received Eaton blowers, starting in the 1992 model year. The Grand Prix didn't get its introduction to forced induction until the 1997 model year, but it kept the boosted option until the final Grand Prix rolled off the line in 2008 (the final Pontiac followed within a couple of years). This one made 240 horsepower, making it King of Grand Prix engines until the 2005 model year (when the GXP and its 303-horse V8 engine showed up). The very last year for a Grand Prix with a manual transmission was 1993 (there had been a three-pedal Grand Prix drought from 1973 through 1988, just to put things in perspective), so this car has the mandatory four-speed automatic. The Grand Prix lived on GM's W platform for its last two decades, making it sibling to the Impala, Regal, and Intrigue in 2001. Until the 2004 model year, every W-Body Grand Prix was built at Fairfax Assembly in Kansas City (no, the other Kansas City). Production of the final generation of Grand Prix took place in Ontario. It seems fitting that this car's final pre-crusher parking spot would be between two other GM products of the same era: a Monte Carlo and a Vibe. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...