2004 Pontiac Gto One Owner Low Mileage Only 78k. Looks Great Runs Brand New on 2040-cars

Auto blog

NHTSA investigating 550k Pontiac G6 models, 320k Honda Odysseys

According to two separate reports in The Detroit News, the National Highway Traffic Safety Administration is launching investigations into 550,000 Pontiac G6 (pictured above) and 320,000 Honda Odyssey (pictured right) models. The G6 models are all from the 2005 to 2007 model years, while the Odyssey minivans are from the 2003 and 2004 model years. The two NHTSA probes are not related.
In the case of the G6, this is an upgrade to an original investigation that started in February after NHTSA received "hundreds of reports" that the brake lights on these cars may malfunction. According to The Detroit News, the lights may come on when the brake pedal is not depressed, and likewise, the brake lights may not illuminate when the pedal has been pushed. General Motors was able to provide NHTSA with a significant number of warranty claims, including 1,100 reports that could potentially relate to this problem, one of which indicates a vehicle crash.
For Honda, the NHTSA probe concerns airbags that may deploy unexpectedly. The government agency received six complaints from 2003-04 Odyssey owners saying that the front airbags suddenly went off without a crash. The Detroit News reports that three of the six owners sustained injuries from these incidents. Additionally, NHTSA has received 41 complaints from owners saying the vehicle's airbag warning light had illuminated.

This Hoonigan mechanic's twin-turbo Trans Am is wonderful

What do you drive when you work on rally machines for a living? Probably a Subaru WRX, and that's what Gregg Hamilton had for a while until working on his car felt too much like his day job. So when he moved from New Zealand to the US to work for Ken Block (with a few stops along the way) he bought something entirely different. This is Gregg's 1979 Pontiac Firebird Trans Am. It's a throwback to another time, but it's anything but stock. It has that magic combination of a big V8 with a manual transmission and rear drive, just like the tin-top racers Gregg watched in his Kiwi youth. He bought it sight unseen from its previous owner in Alabama, and has been tinkering with it ever since. There's something about the flared wheel arches and the classic Firebird gold-striped black livery that has us smitten. Scope out the six-minute clip above from Petrolicious and see if you don't fall for Gregg's Pontiac as well.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...