2004 No Reserve Pontiac Gto Coupe 5.7l Leather Cold Ac Florida Vehicle Clean on 2040-cars

Auto blog

Junkyard Gem: 1992 Pontiac Sunbird convertible, with extremely rad W25 Appearance Package

Radwood has sparked a revival in the appreciation of goofy 1980s and 1980s automotive fashions, from neon-colored tape stripes to excessive TURBO badging to ads featuring horrifying Nagel-style women with radio faceplates instead of eyes. I see a lot of discarded cars that would have been ideal to bring to Radwood, and today's Junkyard Gem is even radder than, say, a purple Mercury Tracer Trio or a teal Chevy Beretta GT or even the elusive Dodge Daytona IROC R/T (yes, there were IROC Daytonas): a genuine Pontiac Sunbird SE convertible with the W25 Appearance Package and Bright White Star wheels. The W25 package got you a white Sunbird with kicky script badging, white wheels, and — if you opted for the optional 3.1-liter V6 — these candy-cane-influenced red-and-white displacement badges on the fenders. Now this is rad! The white interior got dirty fast, especially if the owner left the convertible top down, and these wheels were tough to keep clean for more than a few hours. This one appears to have spent many years sitting abandoned with the top down, judging by the completely trashed interior. The base engine for 1992 was the good old Cavalier four-banger, complete with 111 horsepower. This 3.1-liter engine made a respectable-for-1992 140 horses, for plenty of torque-steery, tire-squealy fun. As a J-Body car, the Sunbird was a sibling to the Chevrolet Cavalier in 1992 (the J-based Cadillac Cimarron, Oldsmobile Firenza, and Buick Skyhawk departed before the end of the 1980s). Starting in 1994, the Pontiac Sunfire replaced the Sunbird, continuing in production all the way through the demise of the J platform in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Where (in Canada) would you test-drive your Sunbird? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: