1969 Pontiac Custom S Rare on 2040-cars

Auto blog

This junkyard '91 Grand Am is as hooptie as it gets

I spend a lot of time in junkyards. A lot of time. With all this experience, I have learned to recognize a perfect hooptie when I see one, a car whose final owner got every last bit of use out of it when its value was hovering right about at scrap value. This 1991 Pontiac Grand Am that I spotted in a San Francisco Bay Area self-service wrecking yard a few days ago, from the final model year for the third-generation Grand Am, checks all the hooptie boxes just right. First of all, it's a low-option coupe with the wretched and unloved GM Iron Duke engine, a rattly, gnashy, thrashy 2.5-liter four-cylinder kludged together using off-the-shelf parts from the Pontiac 301-cubic-inch V8 during the darkest years of the Malaise Era and used in cars whose buyers just didn't care. Most of the paint has been burned off by 25 years of harsh California sun, but the car spent sufficient time in a damp, shady spot for lichens to build up here and there. There are skeletons-with-sombreros stencils sprayed here and there, plus a big moonshine-guzzling skeleton mural painted on the hood. Goodbye, property values! Still, someone felt some affection for this car, giving it the name "Good Ol' Snakey" and painting that name on the decklid. We can assume that the Iron Duke was a bit loose by this time, probably leaving a serpentine trail of blue smoke behind the car at all times. So, the combination of cheapness, ugliness, menace, and who-gives-a-damn functionality make this Grand Am an excellent example of a pure hooptie. Within a couple of months, it will be crushed, shredded, shipped out of the Port of Oakland, and reborn in China as refrigerators and Geely Emgrands. Somewhere in Northern California, though, a few of Ol' Smokey's friends will remember this car fondly.

Junkyard Gem: 2007 Pontiac G6 GT Convertible

GM's Pontiac Division sold its first convertibles during the 1927 model year (just a year after the division's creation), then proceeded to offer memorable drop-tops for most of the following 83 years. The best-selling convertible to bear Pontiac badges during our current century was the retractable-hardtop-equipped G6, available from the G6's introduction in 2006 through the second-to-last model year of 2009 (the Sunfire convertible was available just through 2000, while the Firebird convertible vanished with the demise of the slow-selling Firebird itself after 2002). Here's one of those G6 GT convertibles, found in a Denver-region boneyard after a crash ended its driving career. Mashed right front, popped airbags. This sort of damage might have been worth repairing in 2009, but not today. The 2007 G6 was available as a coupe, sedan, or convertible. All the convertibles had the GT trim level and the 3.5-liter V6 and its 224 horsepower. The MSRP on this car was $28,750 (about $42,325 in 2022 dollars), making it the most expensive G6. The power hardtop roof folded up into the trunk, leaving 1.8 cubic feet of trunk storage space with the top down. This Karmann-designed roof system made the interior much quieter than that of a traditional soft-top convertible. All G6s were built at Orion Assembly in Michigan, where Chevy Bolts are born today. The G6 was built through the 2010 model year, making it one of the very last Pontiac models (the Vibe also made it to 2010, though it was really a Toyota Matrix). In hindsight, 2007 turned out to be an ominous year for GM. 

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...