1969 Gto Judge Convertible 400 Ram Air Automatic Posi Cloned Custom S on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

This 1988 Pontiac Grand Prix Daytona 500 pace car could be yours

Hopefully, the fans of GM's W-body '80s/'90s intermediates can forgive us, but we had pretty much forgotten — or had never really known — that one of the ways that era's Pontiac Grand Prix bathed itself in glory was by serving as the pace car for the Daytona 500. In fact, the Grand Prix paced NASCAR's marquee race every year from 1988 to 1992, and again in 1997, 1998, 2000 and 2003. That first year, 1988, the Grand Prix was all-new, making its debut on the W-body platform. It was also Motor Trend's car of the year. The 1988 Daytona 500 marked the 17th year in a row that a Pontiac was chosen to set the pace but the first time a front-wheel-drive car was so honored. The '88 Grand Prix followed a spate of Pontiac Trans Ams. This '88 Grand Prix, for sale right now on eBay Motors, is presented as an actual pace car, although fans could order a complete set of pace car decals for their very own GP. The pace car is based on that year's top-spec Grand Prix, the SE. In place of the standard car's 2.8-liter V6, however, the pace car uses a modified 3.1-liter V6, which is hooked to a five-speed manual transmission. This Grand Prix is otherwise largely standard fare excepting the roof-mounted light bar, the switches for which are located next to the radio. The mechanical odometer tucked into the digital instrument cluster shows just over 5,000 miles, and presumably, not all of them were acquired on the high-banked oval. With four days to go in the auction, bidding sits at $4,000 with the reserve unmet. Although the reserve is unknown, one clue is that this Grand Prix had been listed by a classic-car dealership in Pennsylvania for $18,500. Besides the debut of the W-body Grand Prix pace car, the 1988 race is also notable for its final lap: Bobby Allison held off his son, Davey Allison, to take the checkered flag, with the father-son duo enjoying a 1-2 finish. Now, who wants to re-live those Grand Prix glory days? Get on your Pontiac and ride!   This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: