1967 Pontaic Gto Hardtop on 2040-cars

Auto blog

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Steve McQueen barn find: Movie Trans Am surfaces after almost 40 years

An important Steve McQueen film car has emerged from barn storage. No, it's not yet another " Bullitt" Mustang, quite the contrary: The car in question is a 1980 Pontiac Trans Am, and it starred in McQueen's final film, " The Hunter." In the movie, McQueen plays a bounty hunter, and while in " Bullitt" he's quite the wheelman, that's not the case in this one. McQueen's character, "Papa" Thorson, is a horrible driver, and the Trans Am is far too much car for him. A chase sequence sees McQueen driving a combine harvester to catch the perps who are driving his stolen rental Pontiac, and the Trans Am ends up blown in half with dynamite, then returned to the airport on a trailer. The driver of said GMC truck and trailer combination, Harold McQueen (no relation), received the title of the first car used in filming, and for the following decades planned to fix the now-ruined car, but never got around to it. Instead, the 1,300-mile Pontiac wreck sat on a farm for nearly 40 years, until Harold decided to sell it to an enthusiast. There's studio documentation proving the car's pedigree, and stunt modifications can be seen in the Pontiac's floor and dash. While it's obviously in dreadful condition, the car remained more intact than the other stunt car the film crew blew up even more spectacularly — that car ended up as the pile of parts in the airport scene, and those bits and pieces were eventually dropped off at a junkyard after a Pontiac dealer refused them. McQueen did also drive a 1951 Chevrolet in the film, and kept that yellow convertible after filming was wrapped up. Sadly, he was diagnosed with cancer just a month later, after reportedly being in poor health during the shooting, and passed away in December 1980. The yellow Chevy stayed with his estate for some years, later getting restored and auctioned. Right now, it's not clear what the Trans Am's fate will be. The car's current owner, Calvin Riggs from Carlyle Motors in Katy, Texas, wants to know more about the Trans Am and the film shoot: His post on Hemmings includes a lot of information, but more would be useful. Related Video:

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.