1966 Pontiac Gto on 2040-cars

Auto blog

GM knew about fatal Chevy ignition problem decade before recall

Well, this is not good for General Motors. Following a report last week that GM was recalling 778,000 Chevrolet Cobalt and Pontiac G5 compacts over concerns that the ignition could switch out of the "run" position without warning, USA Today reports that the Detroit-based behemoth knew about the issue, which affected 2005 to 2007 Cobalts (the Cobalt shown above and in the gallery is from 2010) and 2007 Pontiac G5s, all the way back in 2004.
The information comes from a deposition in a civil lawsuit against GM, obtained by USA Today, which claims that a GM engineer experienced the issue while the then-new model was undergoing testing. The issue was "solved" when a technical service bulletin was issued in 2005, informing dealers to install a snap-on key cover on the cars of customers who complained about the issue. According to the Cobalt's program engineering manager, Gary Altman, the cover was an "improvement, it was not a fix to the issue."
The case where the depositions were made was from 2010, and involved Brooke Melton, a 29-year-old pediatric nurse in Georgia who was killed on her birthday. At the time, police claimed she was going too fast on a wet, rural road, although it later came out through the black box that her car's ignition had come out of the "run" position at least three seconds before the accident (the max amount of time a black box records before a wreck), disabling her airbags, power steering and anti-lock brakes. According to USA Today, police said Melton was "traveling too fast for the roadway conditions," although it's impossible to know if she'd have been in the wreck, which injured the occupants of another vehicle, had her 2005 Chevy not shut off. GM settled the Melton family's case, although the details remain confidential.

The last Pontiac Fiero sold for $90,000 at auction

On August 16, 1988 the last Pontiac Fiero, a red GT model, rolled off the assembly line at GM's Pontiac Assembly plant located in Pontiac, Michigan. It wasn't just the final Fiero, but the final car to be built at that site. The car was raffled off to one of 1,400 plant employees that would soon have to find jobs elsewhere. Whoever that employee was, they remained faithful to the Fiero and kept it in mint condition for 32 years. Last month, it was finally time to move on. It crossed the block at GAA Auctions in Greensboro, North Carolina where it sold for an astounding $90,000. According to the auction house, that's a new world record. The price no doubt reflected the car's place in history as the last example of GM's 1980s mid-engined sports car. However, it was also showroom-new, with just 582 miles clocked on its 2.8-liter V6. 1988 models were also fitted with an upgraded, Lotus-esque suspension produced for just that one year. In addition, this car, serial number 226402, came with its original build sheet, photos from the assembly line, and a collection of news articles and books. It still wore its pre-delivery plastic on the interior and was fully loaded with automatic transmission. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car's custodian for the past 32 years must be pleased. Bidding started at $25,000 but soon rocketed past the $65,000 reserve. You can see the action starting at the 2:50:13 mark in the video above. The Fiero was symbolic of the 1980s and stood out from the standard GM passenger car fare for its mid-engine layout and plastic body panels. In an era when GM often rebadged cars with minimal differences, the Fiero rode on its own unique chassis. It was positioned as one of the defining products for Pontiac, GM's "excitement" brand, but actual performance never quite lived up to its striking looks.  Nevertheless, it garnered a cult following. It's often the basis for (questionable) custom builds mimicking more exotic models like Ferraris and Lamborghinis, thanks to a steel space-frame design that allows body panels to be easily removed. Thankfully, this significant example escaped such a fate and will live on as a reminder of an interesting chapter of automotive history.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...