2009 Pontiac G-5 Gt 2door Automatic 17" Wheels on 2040-cars

Auto blog

Distracted driver crosses center line and hits police car

Attentive driving and quick reflexes saved the life of a police officer in Hudson, WI, when an oncoming driver drifted into the officer's lane and struck his cruiser. According to KMSP, the officer was patrolling along a busy road through Hudson on March 31 when the crash occurred. Dash cam video from the patrol car which was released to local media shows the dramatic collision unfold. As the officer came around a mild left-hand curve, a white, 90s-era Pontiac Grand Am continued straight through the curve, across the center line, and directly into the officer's path. The officer was able to avoid a head-on collision, but the Pontiac still struck the driver's side of the patrol car. "Both the officer and the other driver are ok, however, this accident could have been much, much worse," said a Hudson Police Department official on the department's Facebook page. "So please remember to pay attention to your driving at all times when behind the wheel." Minnesota's Department of Public Safety estimates that one in every four crashes in the State of Minnesota are caused by distracted drivers. DPS believes that the actual number may be higher, but police often have difficulty proving distracted driving as the cause of a crash. Government/Legal Pontiac Driving Safety Coupe Police/Emergency

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Steve McQueen barn find: Movie Trans Am surfaces after almost 40 years

An important Steve McQueen film car has emerged from barn storage. No, it's not yet another " Bullitt" Mustang, quite the contrary: The car in question is a 1980 Pontiac Trans Am, and it starred in McQueen's final film, " The Hunter." In the movie, McQueen plays a bounty hunter, and while in " Bullitt" he's quite the wheelman, that's not the case in this one. McQueen's character, "Papa" Thorson, is a horrible driver, and the Trans Am is far too much car for him. A chase sequence sees McQueen driving a combine harvester to catch the perps who are driving his stolen rental Pontiac, and the Trans Am ends up blown in half with dynamite, then returned to the airport on a trailer. The driver of said GMC truck and trailer combination, Harold McQueen (no relation), received the title of the first car used in filming, and for the following decades planned to fix the now-ruined car, but never got around to it. Instead, the 1,300-mile Pontiac wreck sat on a farm for nearly 40 years, until Harold decided to sell it to an enthusiast. There's studio documentation proving the car's pedigree, and stunt modifications can be seen in the Pontiac's floor and dash. While it's obviously in dreadful condition, the car remained more intact than the other stunt car the film crew blew up even more spectacularly — that car ended up as the pile of parts in the airport scene, and those bits and pieces were eventually dropped off at a junkyard after a Pontiac dealer refused them. McQueen did also drive a 1951 Chevrolet in the film, and kept that yellow convertible after filming was wrapped up. Sadly, he was diagnosed with cancer just a month later, after reportedly being in poor health during the shooting, and passed away in December 1980. The yellow Chevy stayed with his estate for some years, later getting restored and auctioned. Right now, it's not clear what the Trans Am's fate will be. The car's current owner, Calvin Riggs from Carlyle Motors in Katy, Texas, wants to know more about the Trans Am and the film shoot: His post on Hemmings includes a lot of information, but more would be useful. Related Video: