Pontiac Firebird Formula Firehawk Not Trans Am Camaro on 2040-cars

Auto blog

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

'67 Chevy Corvair convertible vs. '86 Pontiac Fiero in cult classic showdown

Every few a decades, the folks running General Motors lose their minds briefly try to market a car that public doesn't see coming and often aren't ready for. In the '60s there was the rear-engine, air-cooled Chevrolet Corvair, then the mid-engine Pontiac Fiero in the '80s and the completely bizarre Chevy SSR in the 2000s. What all of these had in common was that they bucked the trend for American models of their era, for better or worse. The latest episode of Generation Gap tasked the hosts with finding two cult classic vehicles to choose between; they came come up with two of these quirky products from The General.
On the classic side, there's a 1967 Chevy Corvair Monza convertible. Being from later in the production run, it wears slightly more aerodynamic styling than the earlier, boxier examples. Hanging out back is an air-cooled, 2.7-liter flat-six pumping out a robust 95 horsepower. In the other corner is the somewhat more modern 1986 Pontiac Fiero SE with a mid-mounted, 2.5-liter "Iron Duke" four-cylinder, an engine nearly ubiquitous in GM cars of the '80s.
Judging by when they were new, the Corvair was far more successful than the Fiero with over 1.8 million sold. Of course, Ralph Nader's book Unsafe at Any Speed kind of poisoned the well, even if the poor safety reputation wasn't entirely deserved. The Fiero on the other hand only lasted for a few model years before shuffling off, but it eventually got its own performance boost with the V6 version and rather attractive GT models. Check them both out in the video and tell us in Comments which you want in your garage.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: