2000 Pontiac Firebird Trans Am Coupe 2-door 5.7l on 2040-cars

Auto blog

Junkyard Gem: 1989 Pontiac Sunbird SE Coupe

General Motors built the fantastically successful J-Body cars starting at the dawn of the 1980s and continuing well into our current century, on five continents. The Pontiac Division's version of the J started out being called the J2000 and the 2000, then got the Sunbird name originally used on the Pontiac-ized Chevy Monza starting in 1983. Here's a once-slick-looking 1989 Sunbird SE Coupe, found at a Minneapolis-area boneyard way back in 2016. The best-known of all the J-Body cars, here, was the Chevrolet Cavalier, but Pontiac far outdid even the most blinged-up Cavalier Z24 when it came to elaborate taillights. Because this is Minnesota, the car is a patchwork of various layers of junkyard-obtained rusty body parts. One fender has TURBO badges from a Sunbird GT. The other side has the correct engine badges for this model. That engine is a 2.0-liter, single-overhead-cam straight-four from an engine family originally developed for the Opel Kadett D. This one was rated at 96 horsepower when new. This one has the automatic transmission, so it wouldn't have been very much fun to drive. Check out that cool parking brake handle, though! And, hey, is that a full can of Colorado Cool-Aid in the foot well? You'd think a proper Minnesota Pontiac would at least be full of Grain Belt cans. It appears that Higley Ford in Windom, Minn., had this car on the lot at some point. Windom is closer to Sioux Falls than to Minneapolis. This final mileage total looks good for a car living in Tinworm Country. Pontiac built this generation of Sunbird from the 1988 through 1994 model years, though it was really just a facelift of the first-generation cars. Starting in 1995, the Pontiac J-Body became the Sunfire, and production continued until the J platform itself got the axe in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the 90s, fun will become the exclusive province of the rich. To which the Sunbird driver replies, "Bullish!" Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM knew about fatal Chevy ignition problem decade before recall

Well, this is not good for General Motors. Following a report last week that GM was recalling 778,000 Chevrolet Cobalt and Pontiac G5 compacts over concerns that the ignition could switch out of the "run" position without warning, USA Today reports that the Detroit-based behemoth knew about the issue, which affected 2005 to 2007 Cobalts (the Cobalt shown above and in the gallery is from 2010) and 2007 Pontiac G5s, all the way back in 2004.
The information comes from a deposition in a civil lawsuit against GM, obtained by USA Today, which claims that a GM engineer experienced the issue while the then-new model was undergoing testing. The issue was "solved" when a technical service bulletin was issued in 2005, informing dealers to install a snap-on key cover on the cars of customers who complained about the issue. According to the Cobalt's program engineering manager, Gary Altman, the cover was an "improvement, it was not a fix to the issue."
The case where the depositions were made was from 2010, and involved Brooke Melton, a 29-year-old pediatric nurse in Georgia who was killed on her birthday. At the time, police claimed she was going too fast on a wet, rural road, although it later came out through the black box that her car's ignition had come out of the "run" position at least three seconds before the accident (the max amount of time a black box records before a wreck), disabling her airbags, power steering and anti-lock brakes. According to USA Today, police said Melton was "traveling too fast for the roadway conditions," although it's impossible to know if she'd have been in the wreck, which injured the occupants of another vehicle, had her 2005 Chevy not shut off. GM settled the Melton family's case, although the details remain confidential.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...