1970 Pontiac Firebird 350 Th350 Phs on 2040-cars

Auto blog

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1986 Pontiac Sunbird Sedan

The J-Body platform was a giant seller for GM, staying in production from the first 1981 Chevrolet Cavalier all the way through that final 2005 Pontiac Sunfire. Outside of North America, Opels and Daewoos and Isuzus and Holdens and Vauxhalls and even Toyotas flew the J flag, and better than ten million rolled out of showrooms during that quarter-century. In the United States, Chevrolet, Oldsmobile, Pontiac, Buick, and Cadillac each sold J-Bodies. Of those, the Pontiac Sunbird often had the sportiest image, more cavalier than even the Cavalier Z24. I've documented a discarded Sunbird Turbo in the past, and now here's a bread-and-butter Sunbird sedan from the same era. The Sunbird name began its life in 1976 on the Pontiac-badged version of the rear-wheel-drive Buick Skyhawk, itself based on the Chevy Vega. The first J-Body Pontiacs had J2000 badges, then 2000 badges, then 2000 Sunbird badges, until finally the pure non-2000 Sunbird appeared for the 1985 model year. I remain disappointed that the 2000 name didn't survive into our current century, because we could have had a 2000 Pontiac 2000, or just the "2000 2000" for short. The base engine in the '86 Sunbird was this SOHC 1.8-liter four of Brazilian origin, rated at 84 horsepower. Originally developed by Opel in the late 1970s, this engine family went into cars built all across the sprawling GM empire. 84 horsepower doesn't sound like much— and it wasn't much, even by 1986 standards— but at least the original buyer of this car had the smarts to get the five-speed manual transmission. This car weighed just 2,336 pounds, a good 500 pounds lighter than the current Chevy Sonic, so performance with the manual transmission was tolerable. The '86 Sunbird's interior was much nicer than those in its Cavalier siblings, though nowhere near the Cadillac Cimarron's reading on the Plush-O-Meter. An AM/FM/cassette stereo with auto reverse was serious audio hardware in a cheap car during the middle 1980s, when even a scratchy factory AM-only radio cost the equivalent of several hundred 2020 bucks. The price tag of this car started at $7,495, or about $17,500 in 2020 dollars. The cheapest possible Cavalier sedan went for $6,888 in 1986, but a zero-option base '86 Cavalier would make you think you'd been transported to the Soviet Union every time you slunk into its harsh confines. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.