1968 Pontiac Firebird on 2040-cars

Auto blog

Junkyard Gem: 2001 Pontiac Bonneville SSEi

The General's Pontiac Division sold Bonnevilles from 1958 through 2005, which turned out to be well over half of the marque's existence. Named after the Bonneville Salt Flats, some Bonnevilles were huge but pretty quick, others were slow-motion land yachts, and some were nearly indistinguishable from their Buick and Oldsmobile brethren. The final generation, sold for the 2000 through 2005 model years, were among the quickest and most distinctive-looking Bonnevilles ever built, but they arrived in showrooms at a time when the clock was ticking for the division's very survival. Today's Junkyard Gem is one of those cars, an '01 with the hot-rod SSEi package. The Bonneville SSEi first appeared in the 1992 model year, just a year after the Buick Park Avenue Ultra was the first of many GM cars to get the 3.8-liter Buick V6 with an Eaton supercharger bolted on top. Production of the Bonneville SSEi continued through the 2003 model year, after which the GXP version and its Cadillac Northstar V8 took over. The 2001 version of this engine made 240 horsepower, good for plenty of torque-steery fun. Could you get this car with a manual transmission? What do you think? Some cursory research indicates that 1970 was the last model year for a three-pedal Bonneville, and even those cars must be incredibly rare. This one looks to have been in nice shape when it arrived here, with the original manuals still in the glovebox. By 2006, the Bonneville was gone; four years later, Pontiac was gone. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Stop all black Bonnevilles!

GM recalling another 1.3-million cars over power steering woes

When it rains, it pours. General Motors has announced yet another major recall, covering 1.3 million units in the American market over concerns that the power steering could suddenly fail. As reported by The Detroit News' David Shepardson, GM has now recalled nearly ten times as many cars as it did all of last year.
It's important to note that should this problem arise in these cars, the steering won't fail completely, however, power steering could suddenly stop functioning. Manual steering would still be possible, but as GM says, there's an increased risk of accidents, particularly at lower speeds.
Like the ignition switch recall, this latest problem covers a wide range of vehicles from Chevrolet, Saturn and Pontiac. Normally, we'd give you the full rundown in paragraph form, but the variety of models and model years means a list is just easier. So, have a look, directly from GM's press release:

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...