No Reserve...low Miles...leather on 2040-cars

Auto blog

General Motors Recall List

It seems General Motors can't go more than a few weeks without issuing a major recall. Since the initial ignition lock recall on February 10, over 25 million vehicles have been recalled for defects. It seems General Motors can't go more than a few weeks without issuing a major recall. Since the initial ignition lock recall on February 10, over 25 million vehicles have been recalled for defects. We used the National Highway Traffic Safety Administration recall list to compile a snapshot of all the GM vehicles recalled in the last two months. NHTSA also provides a search engine that allows owners to search for recalls on their vehicle. An automotive company must do everything in their power to notify its customers when a recall is issued on a vehicle. If you own any of the following vehicles and you have questions regarding your car, you can contact Chevrolet at 1-866-694-6546, GMC at 1-866-996-9463, Buick at 1-800-521-7300 and Cadillac at 1-866-982-2339. Or check out General Motor's recall site. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to www.safercar.gov. Here's a brief summery of the other vehicles currently under recall: July 26 – 414,333 cars affected NHTSA Campaign Number: 14V447000 Models under recall: Certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. Problem: In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position. Consequence: If the driver's seat unexpectedly drops, the distraction and altered seat position may affect the drivers' control of the vehicle, increasing the risk of a crash. Solution: Dealers will replace the height adjuster shoulder bolts, free of charge. July 14 – 16,939 cars affected NHTSA Campaign Number: 14V341000 Models under recall: Certain model year 2011 Cadillac CTS vehicles manufactured October 18, 2010, to June 2, 2011. Problem: In the affected vehicles, vibrations from the drive shaft may cause the vehicle's roll over sensor to command the roof rail air bags to deploy. Consequence: If the roof rail air bags deploy unexpectedly, there is an increased risk of crash and injury to the occupants.

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

The last Pontiac Fiero sold for $90,000 at auction

On August 16, 1988 the last Pontiac Fiero, a red GT model, rolled off the assembly line at GM's Pontiac Assembly plant located in Pontiac, Michigan. It wasn't just the final Fiero, but the final car to be built at that site. The car was raffled off to one of 1,400 plant employees that would soon have to find jobs elsewhere. Whoever that employee was, they remained faithful to the Fiero and kept it in mint condition for 32 years. Last month, it was finally time to move on. It crossed the block at GAA Auctions in Greensboro, North Carolina where it sold for an astounding $90,000. According to the auction house, that's a new world record. The price no doubt reflected the car's place in history as the last example of GM's 1980s mid-engined sports car. However, it was also showroom-new, with just 582 miles clocked on its 2.8-liter V6. 1988 models were also fitted with an upgraded, Lotus-esque suspension produced for just that one year. In addition, this car, serial number 226402, came with its original build sheet, photos from the assembly line, and a collection of news articles and books. It still wore its pre-delivery plastic on the interior and was fully loaded with automatic transmission. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car's custodian for the past 32 years must be pleased. Bidding started at $25,000 but soon rocketed past the $65,000 reserve. You can see the action starting at the 2:50:13 mark in the video above. The Fiero was symbolic of the 1980s and stood out from the standard GM passenger car fare for its mid-engine layout and plastic body panels. In an era when GM often rebadged cars with minimal differences, the Fiero rode on its own unique chassis. It was positioned as one of the defining products for Pontiac, GM's "excitement" brand, but actual performance never quite lived up to its striking looks.  Nevertheless, it garnered a cult following. It's often the basis for (questionable) custom builds mimicking more exotic models like Ferraris and Lamborghinis, thanks to a steel space-frame design that allows body panels to be easily removed. Thankfully, this significant example escaped such a fate and will live on as a reminder of an interesting chapter of automotive history.