Beautiful 1967 Pontiac Bonneville 2 Dr Hardtop Hot Rod 400 V8 A/t P/b Nice !! on 2040-cars

Auto blog

Lutz says GM was working on 5th-gen Pontiac GTO

Bob Lutz was one of the forces behind bringing the Holden Monaro to the United States, as the ill-fated Pontiac GTO in 2004. And while that car received critical acclaim, it was a sales disappointment. Now, Road & Track is reporting that our suspicions were correct - Pontiac was working on a two-door, G8-based coupe before it was shuttered.
In that R&T article, which is no longer available online, Lutz explained that the new GTO would solve many of the issues found in the original. Car Advice speculates that the new model would have look like a rebadged version of the Holden Coupe 60 Concept from 2008, a conclusion we also came to.
That car would have been a big departure from the 2004 to 2006 GTO. It has an extremely long hood and short rear deck, with an almost fastback roofline and a wide greenhouse with a tall beltline. The wheel arches were very pronounced, and the chin and rocker panel splitters gave it a race-ready look. Would it have been enough to make the GTO work in the US? We think it might of, but it looks like we'll never know.

Junkyard Gem: 1968 Pontiac Catalina sedan

During the late 1960s, General Motors ruled the American car landscape, growing so dominant that the federal government considered antitrust action to break up the company. The General offered sporty Corvettes and muscular GTOs and rugged pickups and opulent Fleetwoods, sure, but the fat part of the sales numbers came from the bread-and-butter full-sized sedans and coupes, which boasted superior engineering and modern-looking styling; in 1967 alone, the Chevrolet Division moved 972,600 full-sized cars, and that's not even counting the 155,100 full-sized Chevy station wagons that year. Pontiac, Buick and Oldsmobile sold the same big cars with division-specific engines and bodywork, and they flew off the showroom floors. For 1968, the entry-level full-sized car from Pontiac was the Catalina, and I've found an example of the most affordable version of the most affordable big Pontiac for 1968, discarded in a northeastern Colorado wrecking yard about 50 miles south of Cheyenne, Wyoming. A '68 GM full-sized coupe, convertible, or even a four-door hardtop might be worth the cost and effort of a restoration, but a no-options base-trim-level post sedan with rust and plenty of body filler just won't get many takers these days. Like so many vehicles that sit outside for decades on the High Plains, this one is full of rodent nests. I wouldn't want to work on the interior of this car without a respirator and a lot of work with a shop-vac, because hantavirus is a significant danger in these parts. Alfred Sloan's plan to offer a stepladder of prestige for GM buyers, in which your first new car was a Chevrolet and you moved up through Pontiac, Oldsmobile, and Buick until you became sufficiently prosperous for Cadillac ownership, worked brilliantly for decades. In 1968, the Catalina was a notch above its Impala sibling on the Snob-O-Meter, with the sedan starting at $3,004 (about $22,600 in 2019 dollars). In fact, the V8-equipped 1968 Chevrolet Impala sedan listed at $3,033, and the Oldsmobile Delmont 88 went for $3,146, so the lines were beginning to blur between the relative positions of the lower-end GM divisions by this time. The base engine in the 1968 Catalina was a 400-cubic-inch (6.5 liter) V8 rated at 265 horsepower and enough torque to tow an aircraft carrier.

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.