Find or Sell Used Cars, Trucks, and SUVs in USA

2003 Bonneville Sle Immaculate One Owner! Simply Like New! 49k Miles! on 2040-cars

US $9,950.00
Year:2003 Mileage:49832 Color: Tan /
 Tan
Location:

Fort Worth, Texas, United States

Fort Worth, Texas, United States
Advertisements
Vehicle Title:Clear
For Sale By:Dealer
Engine:3.8L 3800CC 231Cu. In. V6 GAS OHV Naturally Aspirated
Body Type:Sedan
Transmission:Automatic
Fuel Type:GAS
VIN: 1G2HY54K934127996 Year: 2003
Warranty: Vehicle does NOT have an existing warranty
Make: Pontiac
Model: Bonneville
Trim: SLE Sedan 4-Door
Disability Equipped: No
Doors: 4
Drive Type: FWD
Drive Train: Front Wheel Drive
Mileage: 49,832
Inspection: Vehicle has been inspected
Sub Model: SLE
Number of Doors: 4 Generic Unit (Plural)
Exterior Color: Tan
Interior Color: Tan
Number of Cylinders: 6
Cab Type (For Trucks Only): Other
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

Auto Services in Texas

Zeke`s Inspections Plus ★★★★★

Automobile Parts & Supplies, Battery Storage, Battery Supplies
Address: 1006 S Frazier St, Hufsmith
Phone: (936) 441-3500

Value Import ★★★★★

Used Car Dealers
Address: 1210 N Wayside Dr, Winchester
Phone: (866) 595-6470

USA Car Care ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 202 Cypresswood Dr, Klein
Phone: (281) 355-5800

USA Auto ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 12113 Garland Rd, Rowlett
Phone: (972) 247-4098

Uresti Jesse Camper Sales ★★★★★

Automobile Parts & Supplies, Truck Accessories, Transport Trailers
Address: 13070 Interstate 35 S, Atascosa
Phone: (210) 623-2411

Universal Village Auto Inc ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 6223 Richmond Ave, West-University-Place
Phone: (832) 320-9600

Auto blog

This junkyard '91 Grand Am is as hooptie as it gets

Wed, Jun 29 2016

I spend a lot of time in junkyards. A lot of time. With all this experience, I have learned to recognize a perfect hooptie when I see one, a car whose final owner got every last bit of use out of it when its value was hovering right about at scrap value. This 1991 Pontiac Grand Am that I spotted in a San Francisco Bay Area self-service wrecking yard a few days ago, from the final model year for the third-generation Grand Am, checks all the hooptie boxes just right. First of all, it's a low-option coupe with the wretched and unloved GM Iron Duke engine, a rattly, gnashy, thrashy 2.5-liter four-cylinder kludged together using off-the-shelf parts from the Pontiac 301-cubic-inch V8 during the darkest years of the Malaise Era and used in cars whose buyers just didn't care. Most of the paint has been burned off by 25 years of harsh California sun, but the car spent sufficient time in a damp, shady spot for lichens to build up here and there. There are skeletons-with-sombreros stencils sprayed here and there, plus a big moonshine-guzzling skeleton mural painted on the hood. Goodbye, property values! Still, someone felt some affection for this car, giving it the name "Good Ol' Snakey" and painting that name on the decklid. We can assume that the Iron Duke was a bit loose by this time, probably leaving a serpentine trail of blue smoke behind the car at all times. So, the combination of cheapness, ugliness, menace, and who-gives-a-damn functionality make this Grand Am an excellent example of a pure hooptie. Within a couple of months, it will be crushed, shredded, shipped out of the Port of Oakland, and reborn in China as refrigerators and Geely Emgrands. Somewhere in Northern California, though, a few of Ol' Smokey's friends will remember this car fondly.

Junkyard Gem: 1986 Pontiac Fiero GT

Wed, Nov 2 2022

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Tue, Oct 31 2017

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...