2001 Pontiac Bonneville on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Junkyard Gem: 1992 Pontiac Sunbird convertible, with extremely rad W25 Appearance Package

Radwood has sparked a revival in the appreciation of goofy 1980s and 1980s automotive fashions, from neon-colored tape stripes to excessive TURBO badging to ads featuring horrifying Nagel-style women with radio faceplates instead of eyes. I see a lot of discarded cars that would have been ideal to bring to Radwood, and today's Junkyard Gem is even radder than, say, a purple Mercury Tracer Trio or a teal Chevy Beretta GT or even the elusive Dodge Daytona IROC R/T (yes, there were IROC Daytonas): a genuine Pontiac Sunbird SE convertible with the W25 Appearance Package and Bright White Star wheels. The W25 package got you a white Sunbird with kicky script badging, white wheels, and — if you opted for the optional 3.1-liter V6 — these candy-cane-influenced red-and-white displacement badges on the fenders. Now this is rad! The white interior got dirty fast, especially if the owner left the convertible top down, and these wheels were tough to keep clean for more than a few hours. This one appears to have spent many years sitting abandoned with the top down, judging by the completely trashed interior. The base engine for 1992 was the good old Cavalier four-banger, complete with 111 horsepower. This 3.1-liter engine made a respectable-for-1992 140 horses, for plenty of torque-steery, tire-squealy fun. As a J-Body car, the Sunbird was a sibling to the Chevrolet Cavalier in 1992 (the J-based Cadillac Cimarron, Oldsmobile Firenza, and Buick Skyhawk departed before the end of the 1980s). Starting in 1994, the Pontiac Sunfire replaced the Sunbird, continuing in production all the way through the demise of the J platform in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Where (in Canada) would you test-drive your Sunbird? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.