1969 Pontiac Bonneville on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Steve McQueen barn find: Movie Trans Am surfaces after almost 40 years

An important Steve McQueen film car has emerged from barn storage. No, it's not yet another " Bullitt" Mustang, quite the contrary: The car in question is a 1980 Pontiac Trans Am, and it starred in McQueen's final film, " The Hunter." In the movie, McQueen plays a bounty hunter, and while in " Bullitt" he's quite the wheelman, that's not the case in this one. McQueen's character, "Papa" Thorson, is a horrible driver, and the Trans Am is far too much car for him. A chase sequence sees McQueen driving a combine harvester to catch the perps who are driving his stolen rental Pontiac, and the Trans Am ends up blown in half with dynamite, then returned to the airport on a trailer. The driver of said GMC truck and trailer combination, Harold McQueen (no relation), received the title of the first car used in filming, and for the following decades planned to fix the now-ruined car, but never got around to it. Instead, the 1,300-mile Pontiac wreck sat on a farm for nearly 40 years, until Harold decided to sell it to an enthusiast. There's studio documentation proving the car's pedigree, and stunt modifications can be seen in the Pontiac's floor and dash. While it's obviously in dreadful condition, the car remained more intact than the other stunt car the film crew blew up even more spectacularly — that car ended up as the pile of parts in the airport scene, and those bits and pieces were eventually dropped off at a junkyard after a Pontiac dealer refused them. McQueen did also drive a 1951 Chevrolet in the film, and kept that yellow convertible after filming was wrapped up. Sadly, he was diagnosed with cancer just a month later, after reportedly being in poor health during the shooting, and passed away in December 1980. The yellow Chevy stayed with his estate for some years, later getting restored and auctioned. Right now, it's not clear what the Trans Am's fate will be. The car's current owner, Calvin Riggs from Carlyle Motors in Katy, Texas, wants to know more about the Trans Am and the film shoot: His post on Hemmings includes a lot of information, but more would be useful. Related Video:

Enter now to win this impeccably restored 1969 Pontiac GTO

Autoblog may receive a share from purchases made via links on this page. Pricing and availability are subject to change. No donation or payment necessary to enter or win this sweepstakes. See official rules on Omaze.  Normally when we post about Omaze, it is about some kind of incredible car sweepstakes. Today, well, to be honest, it is more of the same, but in the case of this tastefully done 1969 Pontiac GTO, we don’t even care if you head over to the sweepstakes page to enter, just do it for the photos. ThatÂ’s right. As a self-described automotive photography snob myself, I have to say that the photos of this GTO are far and away the best IÂ’ve ever seen on Omaze. And while youÂ’re over there, might as well enter the drawing. Who doesnÂ’t want that lean, green, muscle machine in their driveway? IÂ’m more of a fastback Mustang guy, and even I was drooling over that GTO.  Win a Restored 1969 Pontiac GTO - Enter at Omaze Here are the specs of the restored 1969 Pontiac GTO in question, according to Omaze: Maximum Seating: 5 Engine: 461 ci fuel-injected V8 Transmission: Tremec TKO600 5-speed manual Drivetrain: RWD  Exterior Color: Verdero Green Interior Color: Black Maximum Horsepower: 575 hp Maximum Torque: 620 lb-ft Approximate Retail Value: $100,000  Cash Alt: $75,000 Special Features: Butler Performance-built EFI 461, Fast EFI v2.1, 3.73 Gears with Eaton Posi Traction, Wilwood 6-piston brakes with hydroboost, Ridetech Coilovers and muscle bars, Chassis Works billet drop spindles, staggered 18” Budnik billet wheels, Budnik steering wheel IÂ’m not the only one on the Autoblog staff who thinks this restoration is worthy of a little praise. News Editor Joel Stocksdale picked it above all the other current Omaze offerings for our holiday staff picks post. HereÂ’s what he had to say: “There are an awful lot of ways to build a restomod. And a lot of those ways can be boring or tasteless. This one is neither. This is a seriously classy Pontiac GTO. Under the hood is a 461 cu. in. V8 from Butler Performance that's based on an actual Pontiac V8, not just another Chevy engine. The whole thing is subtle with a low-key metallic green and clean gray wheels. There isn't any overly flashy chrome or decals. And the interior is the same with just an upgraded steering wheel, shifter and pedals in an otherwise stock cabin. Oh, and it has a manual.