1966 Pontiac Grand Prix Coupe Black Rare Find Amazing Condition on 2040-cars

Auto blog

Junkyard Gem: 1987 Pontiac Firebird

From 1967 through 2002, the Pontiac Division offered the Firebird, close sibling to the Chevrolet Camaro. By the third generation, which debuted for the 1982 model year, it became more difficult to tell the two F-body cars apart at a glance and the Pontiac-exclusive engines of the earlier years disappeared, but the Firebird still retained its own personality and its own position in the GM marketing hierarchy. I still find the occasional 1982-1992 Camaro as I search car graveyards for interesting stuff, but the corresponding Firebirds have become scarce in recent years. Here's a base-engine-equipped '87, its Bright Red paint (yes, that was the official name for the color) faded by the Colorado sun as it awaits the crusher. Firebird shoppers had their choice of three engines in 1987: A 5.7-liter Chevy V8 (210 hp), a 5.0-liter Chevy V8 (205 hp) and the same 2.8-liter 60° V6 that went into the Fiero and countless front-drive GM sedans (135 hp). This car has the base engine. The third-gen F-body didn't weigh much (3,105 pounds for the '87 with six-banger, about what a 2020 Corolla weighs), so 135 horses was tolerable. Plenty of these cars got T-5 5-speed manual transmissions, but this one got the two-pedal setup. Camaro wheels, of course. Our Friend the Carburetor didn't disappear from new cars until the early 1990s in the United States, though electronic fuel injection had become very commonplace by 1987. Still, GM considered this car's EFI worth a door-handle brag. It's not worth fixing up a mashed six-cylinder third-gen Firebird, so we can see the route this car took to its final parking space. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When you're about to be beaten to a pulp by catcalling, Olds-driving thugs, run to the Firebird! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much big hair in these late-1980s Pontiac ads! Featured Gallery Junked 1987 Pontiac Firebird View 24 Photos Auto News Pontiac Automotive History Coupe Firebird pontiac firebird Junkyard Gems

Junkyard Gem: 1989 Pontiac Sunbird SE Coupe

General Motors built the fantastically successful J-Body cars starting at the dawn of the 1980s and continuing well into our current century, on five continents. The Pontiac Division's version of the J started out being called the J2000 and the 2000, then got the Sunbird name originally used on the Pontiac-ized Chevy Monza starting in 1983. Here's a once-slick-looking 1989 Sunbird SE Coupe, found at a Minneapolis-area boneyard way back in 2016. The best-known of all the J-Body cars, here, was the Chevrolet Cavalier, but Pontiac far outdid even the most blinged-up Cavalier Z24 when it came to elaborate taillights. Because this is Minnesota, the car is a patchwork of various layers of junkyard-obtained rusty body parts. One fender has TURBO badges from a Sunbird GT. The other side has the correct engine badges for this model. That engine is a 2.0-liter, single-overhead-cam straight-four from an engine family originally developed for the Opel Kadett D. This one was rated at 96 horsepower when new. This one has the automatic transmission, so it wouldn't have been very much fun to drive. Check out that cool parking brake handle, though! And, hey, is that a full can of Colorado Cool-Aid in the foot well? You'd think a proper Minnesota Pontiac would at least be full of Grain Belt cans. It appears that Higley Ford in Windom, Minn., had this car on the lot at some point. Windom is closer to Sioux Falls than to Minneapolis. This final mileage total looks good for a car living in Tinworm Country. Pontiac built this generation of Sunbird from the 1988 through 1994 model years, though it was really just a facelift of the first-generation cars. Starting in 1995, the Pontiac J-Body became the Sunfire, and production continued until the J platform itself got the axe in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the 90s, fun will become the exclusive province of the rich. To which the Sunbird driver replies, "Bullish!" Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...