1960 Pontiac Bonneville Convertible on 2040-cars

Auto blog

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

Junkyard Gem: 1989 Pontiac 6000 STE AWD

During the middle to late 1980s, General Motors made a big push to grab back some of the sales swiped by makers of European luxury machinery during the previous decade. Around the top of the prestige pyramid, there was the Turin/Hamtramck-built Cadillac Allante taking aim at the Mercedes-Benz 560SEC and the super high-tech Buick Reatta trying to seduce away BMW and Jaguar shoppers; even the Riviera offered a futuristic touchscreen computer sorely lacking in anything out of Stuttgart or Bavaria. The General had a plan to take on the smaller German sporty sedans, too, and Pontiac of the "We Build Excitement" era offered a midsize sedan packed with modern hardware at a great price: the 6000 STE. Here's one of the rarest 6000 STEs of them all, an all-wheel-drive-equipped '89 found in a Denver-area yard last week. Any 6000 STE is extremely hard to find today; when I wrote about a front-wheel-drive 1987 6000 STE back in 2018, desperate owners of these cars filled my inbox with requests — sometimes demands —  for parts that continue to this day. Many of them pleaded with me to help them find an all-wheel-drive version, and now I have managed to find one at Colorado Auto & Parts in Englewood, just south of Denver (in fact, the same yard at which I shot the '87). You may recall CAP as the old-school yard whose owners built the amazing airplane-engined 1939 Plymouth pickup a few years back.  The all-wheel-drive system on the 6000 STE was introduced for the 1988 model year, and it became standard equipment on the 1989 STE. At this time, the automotive industry had taken note of the success of the idiot-proof all-wheel-drive systems offered by AMC and Audi/Volkswagen; Toyota began selling Americans all-wheel-drive Camrys, Celicas, and Corollas, while Ford offered the Tempo and Topaz with optional AWD and Subaru was just beginning to make the switch from manually-selected four-wheel-drive to genuine all-wheel-drive around that time (it took a few more years for everyone to standardize on the 4WD/AWD terminology we use today, though). The 6000 STE AWD was intended to compete with such all-wheel-drive-equipped sedans as the Audi 80 ($23,610), Audi 90 ($28,840), and BMW 325iX ($30,750); its $22,599 price tag (about $50,700 in 2021 dollars) certainly made it seem like a bargain compared to those cars. In addition to the all-wheel-drive system, 1989 6000 STE owners got a digital instrument panel and more switches and buttons than the Space Shuttle.