Nissan Titan Truck Black 6" Lift 35" Tires Over $8,000 In Options 4x4 on 2040-cars

Auto blog

Nissan recalls nearly 20,000 NV vans over gearshift issue

Nissan is recalling 18,800 NV vans built between December 20, 2010 and January 4, 2013. Certain 2012 and 2013 models equipped with a steering-column-mounted transmission shift levers may have been built with improperly installed shift mechanisms.
If the NV's gear selector plate lock clip wasn't installed correctly, normal road vibration could result in a gear position indicator that does not match the actual gear selection. As a result, when the driver selects 'park,' the transmission could still be in gear or in neutral, and roll away. The National Highway Traffic Safety Administration says this condition greatly increased the risk of accident and injury.
Nissan will inspect the gear selector lock clip and replace the part if necessary free of charge. Owners can expect to be notified once the recall campaign begins on April 8, 2013. Read the full recall notice below for more information.

Takata air bag recall list

The National Highway Traffic Safety Administration confirmed yesterday that 33.8 million vehicles with Takata airbags are going to be recalled. It's the largest recall in automotive history. The already record-breaking rate of automotive recalls this year shows no signs of slowing down, especially since millions of cars with defective airbags made by global supplier Takata are under ongoing scrutiny. The federal government is warning owners that inflator mechanisms in the air bags can rupture, causing metal fragments to fly out when the bags are deployed. The faulty air bags have already been blamed for multiple deaths. How do you know if your vehicle is safe? The National Highway Traffic Safety Administration released an updated list of vehicles under recall. Sometimes however, the government's website will crash and the list may not be complete. Check your VIN at the NHTSA website to make sure. The list of cars affected by the recall has not been released, but seem to span multiple models over the years for many of the automakers.

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.