2011 Nissan Sentra Sr Sedan 4-door 2.0l on 2040-cars

Auto blog

Nissan alters all CVTs to act less like a stretched rubberband

Among automotive enthusiasts, no one seems to hold a neutral opinion when it comes to continuously variable transmissions. CVTs are either praised for their ability to boost fuel economy or chided for their occasionally poor driving dynamics. Nissan is among the masters of these un-shifting gearboxes in the US, and it uses them in many vehicles in its lineup. However, for the 2015 model year, several models are getting a software update to make their CVTs a bit more like a conventional automatic.
To give drivers the option of feeling gearshifts while on the road, Nissan is adding its D-Step Shift Logic feature to the CVTs in multiple vehicles. Steve Powers, Nissan's senior manager of powertrain performance, told Autoblog the system forces the transmission to "hold a ratio and then shift" to simulate the way that a traditional automatic would. It's simply a change in software, but the company "can't do it to older CVTs," he said, because it would require changes to transmission logic, as well. According to Automotive News, the upgrade is coming to the 2015 Versa, Versa Note (pictured above), Sentra, V6-equipped Altima, Pathfinder and Quest. "We're rolling it out to all programs," said Powers.
Interestingly, buyer perception appears to be pushing the upgrade. John Curl, a Nissan North America regional product manager, told Automotive News that the decision to add the tech partially comes because some owners are bothered that the CVTs aren't changing gears. According to Powers, D-Step "avoids the rubber band feel," that many drivers didn't like. The different sensation of these transmissions seems like something consumers would notice during the test drive, or that the salesperson would inform them about. The same issue cropped up last year when the company was facing customer satisfaction problems among new buyers customers' unfamiliarity with the gearboxes.

Nissan Murano CrossCabriolet being phased out, no replacement planned

Over the years, I've been given many nicknames - a few of them have even been repeatable around small children. One such moniker is "Mr. Other Makes," a title given to me because of my predilection for sifting through eBay Motors seeking out automotive misfits and orphans. I've got a soft spot for the dreamers and automakers who take big chances on beancounter-enraging flights of fancy.
I count Nissan among that bunch, because for every safe-as-houses Altima or Sentra that rolls out of its factory gates, the Japanese automaker has often secreted away a little funding for white-space niche vehicles that any sane person wouldn't expect to pencil out. Some, like the Juke, have proven to be massive hits. Others, like the GT-R, have become icons. And then there are models like the Murano CrossCabriolet, a segment-bending mashup the likes of which we haven't seen since the AMC Eagle Sundancer.
Yesterday, upon revealing the new third-generation Murano ahead of its New York Auto Show debut, we reported "the writing appears to be on the wall" for the midsize crossover's novel convertible cousin. It appears we were right. Autoblog can now confirm that the CrossCabriolet will die at the end of this model year, and our source at Nissan tells us unequivocally, "there is no plan for a next-generation Murano CC."

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.