2009 Nissan Sentra 2.0 S Fe+ on 2040-cars

Auto blog

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show

2014 Nissan Rogue earns IIHS Top Safety Pick+ [w/videos]

The 2014 Nissan Rogue has scored a Top Safety Pick+ award following positive crash test results by the Insurance Institute for Highway Safety. The new crossover scored good results (the highest rating) in the group's five crashworthiness checks and a basic rating for front crash prevention.
The IIHS found that the Rogue also performed well in its small overlap front test with a low risk of injuries, and the driver's space maintained its structure well. It was an improvement over the previous generation, which received a marginal rating in that evaluation. The Rogue's optional forward collision warning system was enough for a basic rating in avoiding accidents.
To qualify as a Top Safety Pick, a vehicle must earn good ratings in the the moderate overlap front, side, roof strength and head restraint evaluations, plus a good or acceptable result in the small overlap front test. To receive the additional Plus rating in 2014, it must also have a basic, advanced or superior rating for front crash prevention. The IIHS scores vehicles as good, acceptable, marginal or poor, and avoidance systems are scored basic, advanced or superior, depending on the type of system and its performance. Scroll down to watch the videos of the small and moderate overlap crash tests and read the full IIHS statement.

Nissan EV design is diverging in three directions

As the movie awards season kicks into high gear, Nissan design chief Shiro Nakamura appears to be implying that his company's electric-vehicle design prospects are about to go from Philomena into The Wolf of Wall Street territory. Nakamura, speaking with Motor Authority at the Detroit Auto Show last week, allowed that the design of the five-seat Nissan Leaf is fairly conservative and will remain so given that the model continues to be the most practically-minded EV from the company. In the near future, though, Nissan is planning to head in different directions. Specifically, an all-electric sports car and a two-seat commuter vehicle that could come with in-wheel electric motors that will allow the designs to get more radical. How radical? Well, we've heard Nissan may bring the BladeGlider concept (pictured) it unveiled at the Tokyo Motor Show late last year to production. It has a narrow front and wider rear and a 1+2 seating arrangement. Beyond that, Nissan has the two-seat Esflow concept vehicle it showed off in 2011 that could provide some hints, since it's expected that some of the design components from that car will be worked into the upcoming production models.