91 Nissan Pathfinder Se V6 4x4 on 2040-cars

Auto blog

NHTSA investigating 200,000 Sentra, Versa models over brakes

The National Highway Traffic Safety Administration has opened a second investigation into Nissan in May. The first covered inaccurate fuel gauges in the 2007 Quest minivan. The latest affects the Sentra and Versa from the 2013 and 2014 model years and the 2014 Versa Note, because of complaints of long brake pedal travel. If NHTSA finds a problem, it could affect an estimated 200,000 vehicles.
At the moment, this is still only a preliminary evaluation "to asses the scope, frequency and safety-related consequences of the alleged defect," according to the report, but it could lead to the full recall. NHTSA is still trying to find whether or not there are accidents, injuries or fatalities related to the problem. At this time, much of the data in the document is still marked Confidential or TBD. Nissan told Reuters in a statement that the company is working with the agency on the investigation and supplying the regulator with further information.
According to NHTSA, its Office of Defects Investigation has received eight complaints about long pedal travel in these models. They allege that the brake pedal goes all the way to the floor when pressed in some cases and doesn't sufficiently slow the vehicle. Autoblog has contacted Nissan for its reaction to the investigation. We will update this story when we receive a reply. Until then, scroll down to read the current investigation report.

Nissan expands, shrinks Leaf recall for missing weld points

Chalk this one up to the quirks of the English language. The other day, we had a post on the recall of a small number of 2014 Nissan Leaf EVs that were missing weld spots. The official bulletin from the National Highway Traffic Safety Administration said that "any vehicle missing welds will be replaced, free of charge." We read that as saying that the welds would be replaced, but in fact it's the cars themselves that will be swapped out. NHTSA said that 211 Leafs were potentially involved in this recall, but we heard from Brian Brockman, Nissan's senior manager of corporate communications, that Nissan is actually looking at, "approximately 276" vehicles. More importantly, Brockman clarified that, "If a vehicle is found to be missing the welds, the entire vehicle will be replaced." NHTSA documents on Inside EVs show that Nissan expects just 0.65 percent of those Leafs will need to be replaced. Brockman wouldn't say exactly how many cars Nissan thinks are affected, but 0.65 percent of 276 is just 1.8 vehicles. Brockman did say that, "you'd be correct to say that we expect the number to be very low." Read Nissan's full statement below. Nissan is conducting a Voluntary Recall Campaign on approximately 276 MY2014 LEAF vehicles to inspect the front member assembly welds. Due to an isolated supplier process error that has been corrected, a small number of vehicles within a subset of MY2014 LEAF vehicles manufactured during a two-week period may have front frame member assembly components that were not welded to proper specification. This can affect crash performance. Within the next few weeks, affected LEAF owners will be asked to bring their vehicle to a certified Nissan LEAF dealer for an inspection. If the vehicle is determined to be affected, Nissan will provide owners with a brand new replacement vehicle at no additional cost. A loaner vehicle will be provided during the vehicle exchange process. It is anticipated that only a handful of retailed vehicles are affected by the weld issue and require vehicle replacement. Nissan is committed to a high level of customer service and satisfaction and is working with its dealers to provide an outstanding ownership experience to Nissan LEAF owners.

Nissan reveals radical BladeGlider concept for Tokyo debut

Radical reinvention of the automobile doesn't happen very often. There's a reason they refer to it as "reinventing the wheel", after all. But that's what a team of racecar designers did with the original DeltaWing concept in 2010. Originally proposed as an IndyCar racer, the project was subsequently redesigned for Le Mans. That's when Nissan got on board, supported the project for a few races, then took the design in its own direction with the ZEOD RC. And now it's taking it to the road... via the auto show.
What we have here is the BladeGlider concept, a proposal for a delta-shaped electric sportscar which Nissan will present at the Tokyo Motor Show in a couple of weeks. Designed to focus on driving pleasure, the BladeGlider is about as radical as they come. Like the DeltaWing and ZEOD RC, it's got a narrow front track and wide rear to minimize drag and optimize stability, packing a 1+2 seating arrangement to put the driver front and center like in a McLaren F1, with upward-swinging doors and underbody aerodynamics to keep it glued to the road. In-wheel motors (of unspecified output) provide the power, a lightweight lithium-ion battery (not to mention the carbon-fiber bodywork) keeps it all fearther-like, and weight distribution is heavily biased towards the rear at 30:70.
A radical concept, to be sure, but here's the kicker: Nissan wants to build it. As you can see from the press release below, the BladeGlider "is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype for an upcoming production vehicle". While it would undoubtedly take some time to develop, much less certify for road, seeing one of these - or even better, driving one - on our favorite stretches of tarmac strikes us as a prospect worth waiting for.