2005 Nissan Pathfinder Le Fully Loaded, Low Miles on 2040-cars

Auto blog

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.

Nissan expands US EV test market for e-NV200 to Portland

Of course, it's going to be Portland. Oregon's largest city, known for its green-friendly vibe and policies, will be where Nissan will next test of its all-electric e-NV200 cargo van. And we hope those vans have cup holders for the inevitable java. The Japanese automaker is working with local utility company Portland General Electric (PGE) on a six-week trial program. Nissan and PGE will record data to better measure how the concept of battery-powered driving works within the local services network. The location makes sense, as Portland is one of the five best-selling US cities when it comes to sales of the Nissan Leaf, which shares its powertrain with the e-NV200. Nissan kicked off its "No Charge to Charge" free-charging program for new Leaf owners in April. Nissan, which had already been testing the e-NV200 with FedEx in Germany, Japan and Singapore as of late last year, said at the Washington Auto Show in January that it would start testing the electric van in the Washington, DC, area. Nissan said at the time that it helped install about 570 fast-charging CHAdeMO chargers throughout the US since last year, including 200 in December alone. Check out Nissan's press release about the Portland project below. LEADING EV MARKET PORTLAND BECOMES TEST BED FOR NISSAN E-NV200 ELECTRIC COMMERCIAL VEHICLE PORTLAND, Ore. – Portland, already a top breeding ground for electric vehicle (EV) sales, is now the proving ground for Nissan's prototype electric commercial vehicle – the Nissan e-NV200. Nissan is working in collaboration with Portland General Electric (PGE) on a six-week trial to help determine the viability of an electric commercial vehicle in the U.S market. PGE has assigned the e-NV200 into its fleet of vehicles with an underground crew, replacing a larger, diesel-powered van. "Oregon has been a top five market for Nissan LEAF sales in the U.S. due to proactive policies at the state level to encourage EV adoption, as well as robust charging infrastructure championed by the state and others like PGE," said Toby Perry, Nissan's director of EV Marketing in the U.S. "If we determine that e-NV200 fits into the U.S. commercial vehicle market, we expect that Portland would be a leading driver for sales as well." This year, Nissan is deploying two e-NV200 prototypes with companies such as PGE and FedEx in top U.S EV markets including California, Georgia, Oregon and Washington, D.C.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.