1990 300zx Twin Turbo on 2040-cars

Auto blog

Nissan recalling GT-R, Infiniti crossovers over steering column issue

Nissan has discovered a problem with the steering column on some of its higher-end all-wheel-drive vehicles from a few years back, and has issued a recall in conjunction with the National Highway Traffic Safety Administration to address the issue. The issue revolves around the outer tube on the steering column, which may not be perfectly round. That would put extra stress on the upper steering bearing, which could cause it to fracture, disabling the car's steering ability and potentially leading to a crash. The problem affects Nissan's flagship GT-R supercar – specifically 2009 models manufactured between March 14, 2007, and April 25, 2008) as well as an array of Infiniti crossovers: namely the 2008 EX35 and the 2008-09 FX35 and FX45. In the case of the luxury crossovers, Infiniti dealers are being instructed to replace just the steering shaft, but Nissan dealers will have to replace the entire steering column assembly on the GT-R. All told, the recall is estimated to encompass 16,973 vehicles across the United States. RECALL Subject : Steering Column Tube may be Out of Round Report Receipt Date: FEB 02, 2015 NHTSA Campaign Number: 15V054000 Component(s): STEERING Potential Number of Units Affected: 16,973 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering. CONSEQUENCE: Extra play in the steering wheel or a loss of steering may increase the risk of a crash. REMEDY: Nissan will notify owners, and dealers will replace the steering shaft on the Infiniti EX35, FX35, and FX45 vehicles, and will replace the steering column assembly on the Nissan GT-R vehicles, free of charge. The manufacturer has not yet provided a notification schedule. Infiniti owners may contact customer service at 1-800-662-6200. Nissan owners may contact the GT-R hotline at 1-866-668-1487.

Nissan to build Golf-fighter in Spain

Nissan hasn't had a proper European entry in the ridiculously popular compact hatchback segment since it stopped offering its somewhat staid and uninspiring Almera (above) in 2006. According to Automotive News Europe, the new machine, which will not be called Almera, will be marketed against the Volkswagen Golf and Ford Focus - two extremely popular models in Europe. Production is slated to begin in July of 2014.
The new compact will be built in Barcelona, Spain, at the factory that currently builds the Pathfinder, Navara pickup and NV200 commercial van. An investment of $178 million will be made to assemble the compact car, and an additional $27 million will go to the plant to create more trucks and transmissions for electric vehicles.
The decision to invest in Spain comes after the automaker successfully renegotiated contracts with local unions. Similar talks are underway in France, where Nissan partner Renault is based, but as of yet no new agreements have been struck. Feel free to browse through the official press release below.

2021 Infiniti Q50 Red Sport 400 Road Test | Z engine preview

There isn’t much reason to take another look at the 2021 Infiniti Q50 Red Sport 400 on the surface. ItÂ’s largely the same sedan as it was when we drove it in 2016: powerful and stylish, but lacking in tech and polish. However, whatÂ’s under the hood is of far more interest to us today than it was just a year ago. ThatÂ’s because the 3.0-liter twin-turbo V6 powering this Infiniti is migrating over to the next Nissan Z car. Nissan announced that the production Z would get a 3.0-liter twin-turbo V6 not long after it revealed the Z Proto. There are no other twin-turbo V6s in NissanÂ’s arsenal but this one, meaning that the VR30DDTT engine in this Infiniti is destined for the Z — plus, there's photo confirmation. The big question remaining is: How new or different will it be? Its most potent state of tune is rated at 400 horsepower and 350 pound-feet of torque. ThatÂ’s a high number versus most other boosted six-cylinders, and perhaps most importantly, itÂ’s more potent than the 382-horsepower 2021 Toyota GR Supra 3.0. As weÂ’ll soon explain, though, numbers only tell part of the story. Transplanting the InfinitiÂ’s V6 into the next Z surely wonÂ’t be without challenges, either. Nissan is promising a six-speed manual in the Z. Meanwhile, this engine is exclusively paired with a traditional seven-speed automatic transmission in the Q50 and Q60. Nissan hitched this engine up with a manual in a 370Z SEMA show car years ago, but now it must devise a production car solution. ThereÂ’s also the question of whether Nissan will use the same seven-speed as the automatic option in the Z, or come up with something a bit more aggressive. The cost-efficient (and likely) solution would be reusing the seven-speed, not unlike the Supra's eight-speed traditional automatic.  Having all of this in mind, we set out to see how this engine sits today as a preview to the Z.  Going from the big, naturally aspirated VQ series V6 to a smaller twin-turbo V6 will bring about the obvious changes. The rabid and uncouth personality of the outgoing VQ is nowhere to be found in the sweet and smooth new engine. ItÂ’s not quite the silky, effortless BMW inline-six found in the Supra, but it brings an air of refinement and maturity that's simply not there in the current Z. And then thereÂ’s the torque. All 350 pounds of twist are available at 1,600 rpm in the Q50 Red Sport 400, which means the shove in the back would theoretically start just off idle.