2006 Mitsubishi Lancer Es Sedan 4-door 2.0l on 2040-cars

Auto blog

Mitsubishi Outlander PHEV gets more power, range and capabilities

We've driven the Mitsubishi Outlander PHEV a couple of times now, and enjoyed it quite a bit. Even though it's the same version that's been kicking around other markets in its current form for a while now, it was efficient, pleasant to drive, and offers something that is pretty rare right now: a relatively affordable plug-in hybrid midsize crossover. Now, in its home market of Japan, the 2019 Outlander PHEV is getting some significant updates, including more electric power and a bigger gas engine, a bigger battery, improved suspension, two new drive modes and some design tweaks. To start, the PHEV's battery capacity increases from 12 kWh to 13.8 kWh. That boosts its all-electric driving range from 37.8 miles to 40.4 (under Japan's testing cycle). The rear electric motor/generator also gets a slight boost in power. The gas engine increases its displacement from 2.0 to 2.4 liters. The vehicle now offers Sport and Snow modes, and its 4WD Lock mode has been adjusted to better handle poor road surfaces. To improve its ride and handling, Mitsubishi added larger front and rear dampers with a new type of damper valve to the Outlander PHEV. A faster steering ratio and retuned electric power steering control promise better steering feel and response. Mitsubishi has also increased the structural rigidity in parts of the body. Design-wise, the updated Outlander PHEV gets full LED headlights and an updated grille up front. In the rear, there's a new spoiler that improves aerodynamics and gives it a sportier look. Inside, the leather seating gets a new diamond-quilt pattern, along with the door trim. The front seats are also reshaped for more support. The new updates seem like they'll make the Outlander PHEV even more attractive both in terms of performance and design. We doubt that Mitsubishi would choose not offer these improvements in other markets, including the U.S. We've reached out to Mitsubishi to see if and when we can hope to see the improved versions stateside, and we'll update if we hear back. Related Video:

2015 Mitsubishi Outlander Sport recalled for leaky transmission

The Basics: Mitsubishi Motors is recalling 45,731 Outlander Sport crossovers from model year 2015. Built between June 25, 2014 and November 25, 2015, the affected vehicles use the base 2.0-liter four-cylinder engine and continuously variable transmissions. The Problem: A clamp on the CVT hose may have been installed incorrectly. If the hose comes off, transmission fluid can leak out. While the transmission will start acting up – and eventually grind to a halt – the bigger concern is what happens if the transmission fluid comes into contact with hot surfaces: fire. Injuries/Deaths: Thankfully, it doesn't sound any owners have crashed, caught fire, or been injured or killed due to loss of transmission fluid. Mitsubishi didn't list injuries or fatalities in its recall paperwork with NHTSA, but the chronology only describes "warranty claims," which sounds like the vehicles never caught fire. The Fix: Dealers will inspect the hose clamps on all 45,000 Outlander Sports and reinstall them if there's a problem. Repairs are free of charge. If you own one: Since NHTSA's bulletin doesn't advise owners on whether they should or shouldn't drive their vehicles, we recommend looking for leaks and checking your transmission fluid level as soon as possible. If it's low or leaking, you probably shouldn't drive. Featured Gallery 2015 Mitsubishi Outlander Sport View 9 Photos News Source: NHTSAImage Credit: Mitsubishi Recalls Mitsubishi Crossover Economy Cars

Mitsubishi recalls 82,426 vehicles for CVT hesitation issues

The Basics: Mitsubishi is recalling 82,436 vehicles from the 2015 and 2016 model year. The recall affects the continuously variable transmissions, or CVTs, in 2015-16 Outlander Sports, 2016 Outlanders, and 2016 Lancers. Mitsubishi calls their Jatco manufactured CVT a constant velocity transmission. The Problem: According to the document Mitsubishi submitted to the National Highway Traffic Safety Administration, the CVTs in certain vehicles can momentarily lose signal and delay acceleration. This can increase the risk of an accident. Injuries/Deaths: It is unknown if there are any injuries or deaths related to this issue. The Fix: Dealerships will reprogram affected CVTs for free. If you own one: Mitsubishi Motors North America began the recall on August 15. If you own an affected vehicle, contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-006. Mitsubishi dealers should be able to update the CVT's software and resolve the issue. Related Video: News Source: National Highway Traffic Safety Administration Recalls Mitsubishi Crossover Sedan