2011 Mitsubishi Galant 4600 Mile Clean on 2040-cars

Auto blog

Mitsubishi XR-PHEV Concept is a chronicle of an Outlander Sport foretold [w/video]

Mitsubishi's current Outlander Sport has done a yeoman's job since it came on the market for the 2011 model year. The affordable crossover has been one of the few bright spots in the perennially troubled automaker's lineup - it's the brand's best seller in the US and sales are up nearly 40 percent this year. The subcompact CUV has become an increasingly important part of the Mitsubishi lineup, which is why you should pay attention to this XR-PHEV Concept - it's said to presage the next-generation model.
Stylistically, this is a pretty bold little CUV, with a striking face framed by bold zig-zags of chrome that underline the narrow headlamps and frame the massive lower fascia. The profile has a dramatically tapered greenhouse with bold sheetmetal contours and a funky blacked-out A-pillar that emphasizes the hood's height. The rear end is no less dramatic, with dual-pane rear tailgate with a particularly fast rake.
As shown here, the XR-PHEV (pronounced "Cross Runner") is a four-seat CUV that motivates its front wheels through a turbocharged 1.1-liter, three-cylinder engine with 134 horsepower paired with a 120-kW electric motor. In pure-electric mode, the 14-kWh battery is said to be good for 52 miles of cruising range and the combined fuel economy bogey is 66 miles per gallon on Japan's lenient testing cycle.

2013 Mitsubishi Outlander Sport models with leather seats recalled over airbag fears

Mitsubishi is recalling 733 of its 2013 Outlander Sports that were fitted with leather seat covers due to problems with the seat-mounted airbags. Apparently, the wiring for the airbags may have been routed incorrectly when the seat covers were installed at the port.
According to the National Highway Traffic Safety Administration bulletin, the issue only really crops up if owners adjust the height of the seats. Naturally, if the seat wiring is damaged, the airbag may not deploy in the event of a side impact.
The affected vehicles were all manufactured between July 20, 2012 and May 29, 2013. There have been no reported injuries or accidents due to this issue. Mitsubishi, meanwhile, will begin notifying owners, who will need to report to their local dealer for free inspections or repairs. Take a look below for the bulletin from NHTSA.

Mitsubishi recalling 166k cars, crossovers over stall risk

Mitsubishi is recalling 165,923 vehicles in the US because it's possible for the drive belt to detach from their engines, potentially causing a stall. Specifically, the campaign covers 2008-2011 model-year examples of the Lancer, Lancer Evolution (pictured above) and Outlander as well as the 2009-2011 Lancer Sportback and 2011 Outlander Sport. All of the affected models use some version of the brand's 4B1 four-cylinder engine.
According to the National Highway Traffic Safety Administration, the engine pulley can wear causing the drive belt to slip off. If this happens, the alternator, cooling fan and hydraulic power steering can all stop working, and obviously, any of those things could make driving unsafe. However, if the belt detaches, then a warning light should come on in the cabin.
To fix the problem, Mitsubishi dealers will replace the original belt with a redesigned rubber part and will inspect the pulley. If worn, it'll also be replaced free of charge.